Micro Hydro turbine for High Water Head from 300w to 30kw

small body, lightweight, simple structure, reliable operation and convenient assembly
Water Head for installation:
1.5—3.2m
Flow (m
3
/s):
0.025---0.055
Output Voltage (v):

230V(AC)
Output Power (kw):

0.55
Submersible hydro turbine generators
are standard serially produced units. It is a low head propeller design. Reaction turbines require a much larger amount of water flow than impulse styles, but can operate with as little as two feet of head, making them ideal for sites where there may be relatively flat land, but a large water flow. They use either a 'traditional' reaction style runner (propeller runner).a specially designed outlet tube increases the turbine power output by creating suction as the water exits the system.

Model
ST-0.55KW
Diameter of Runner
120mm
Nominal Power
0.55KW
Output Voltage
230V AC
Frequency
50 Hz
Phases
Single-phase
Generator Style
Rear Earth Permanent Magnet
Synchronous Generator
Generator Mode
Vertical
Rotational Speed
1500RPM
Insulation Class
H(Temperature rise limit:125K)
Ingress Protection Waterproof Class
IP65
Efficiency (Max)
ηmax> 60 %
Power Factor
>0.98
Operation Surroundings Temperature
-25°C~+60°C
Operation Surroundings Humidity
0~95%
Packaging Material
Fiberboard/ Wooden
Size & Weight
Size (L x W x H): mm
(345×345×510)
N.W. : 22KG
G.W. : 30KG
Safety

Short circuit Protection,
Islanding Protection,Over Heat
protection,Over Load Protection,
Grounding Fault Protection

In order to provide optimal performance over a wide range, eight (8) different fixed guide vane angles are available. Runners are available with either four (4) blades. The runner blade angles have been set at the best degree. Induction generator is designed for submersible applications.