Electricity Generation: 2011-10-02

Saturday, October 8, 2011

10KW horizontal-axis wind generator

1. Pre-yaw design
2.Low rated torgue,low request to air conditions
3.Maintenance-free
4.CE certificate
5.Delivery fast

10KW horizontal-axis wind generator

Detailed Product Description

Machine Type: horizontal-axis Direct drive wind turbine
1. Blade Form: propeller
2. Blade number: 3 Picese
3. Blade material: glass fiber reinforced plastic
4. Type of generator: permanent-magnet direct drive 3 phase AC
5. Type of tower: guy wire or free standing
6. Output Waveform of inverter: Pure Sine Wave

Basic technical parameters

Power
10KW
Blade diameter
8.0m
Rated rotor speed
200r/min
Rated speed
8m/s
Rated power
10KW
Max power
15KW
Output voltage
220V
Start up wind speed
3m/s
Work speed
3-30m/s
Security wind speed
40m/s
Height of tower
12m
Top quality except tower
600kg
Tower type
guy wire tower
Output controller system
Controller & inverter
System
off-grid system

The Features of our wind generator as follow:
1.Low speed permanent magnet generator
2.Low starting torque,High generating efficiency
3.Glassfibre high efficiency blades
4.Neodymium magnets and bearing with high performance
5.Pre-yaw design for tail vane
6.Designed for minimal maintenance and easy install
7.Aerodynamic brake & manul brake

High-performance controller
1.If the system meet problem ,and the wind turbine is running ,it can prevent the wind turbine race rotation .
2.have the auto-protection function of the batteries Reverse protection, anti-disconnect battery protection, battery damage protection.
3.when the charge current is high in strong wind,controller can load the wind turbine automatically. And charging the battery with low current.
4.The wind turbine brake automatically when the battery bank voltage get to rated voltage 125%; and stop charging the batteries.
5.the wind turbine get back charging the batteries when the the battery bank voltage get to rated voltage 108%
6.Controller with a manual emergency brake switch, users can use depending on the circumstances. Using this switch, the wind turbine will be brake..

Pure sine wave inverter
1. Pure sine wave output can drive any household appliances.
2. Use integrated circuit, less wire connection.
3. Adopting micro-processor technology, improving system integration.
4. Excellent protection includes over voltage shutdown, under voltage shutdown, over load protection, short circuit protection, over thermal protection, etc.
5. Be able to work in wind power or wind&solar hybrid system
6. With high efficiency transformer instead of high frequency e-circuit design
7. Automatic regulate voltage,
8. LCD display operation status,
9. High running stability and reliability
10. True sine wave form power output
11. High efficient transformer isolation
12. Buzzer alarm while over-loading/voltage, high-temperature

Other details
1.The span life of our products is 20~25 years even more.
2.We mainly export to European ,American markets, Middle East market, such as Germany, France, Poland, Rusia , Italy, USA, England and so on.
3.Production capacity: 1000 sets
4.Annual sales: usd 4,900,000

BF-S 300W hybrid wind turbine

300w hybrid wind turbine
Easy to install,operate
30-40% wind efficiency
No noise,galvanized
CE,ISO9001
Advantages:
Our BF-S series hybrid wind turbines utilize a screw type vertical axis wind wheel and magnetic suspention structure,the wind energy coefficient is very high, the start-up wind speed is very low, the anti-wind capability is high,operation is stable,anti-corrosion treatment,beautiful appearance,no noise,maintenace free and long service life.

Techinical parameters:
Model:BF-S-300
Generator Type: permanent magnetic direct drive generator, 3 phase AC

Power
300
Rated wind speed
(m/s)
8-10
Rotor diameter
(m)
1
Start-up wind speed
(m/s)
2.2
Height of blade
(m)
1.2
Range of working wind speed(m/s)
2.2-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/2
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
150r/min
Output Voltage
AC12/24V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
40%-45%
Sweep wind area(m²)
1.1304
Range of working temperature
-45-60
Suggested supporting battery
2pcs12v100ah
Top weight (kg)
35
Tower type and height
Guy cable tower/8m
Note:

1. Tower type and tower height can be changed as per your request.
2. Working voltage can be special requested.
3. CE,ISO9001:2008
4. For the power curves and details,please feel free to contact me.

BF-S 300W vertical wind generator

300w vertical wind generator
Easy to install,operate
30-40% wind efficiency
No noise,galvanized
CE,ISO9001
Advantages:
Our BF-S series vertical wind generator utilize a screw type vertical axis wind wheel and magnetic suspention structure,the wind energy coefficient is very high, the start-up wind speed is very low, the anti-wind capability is high,operation is stable,anti-corrosion treatment,beautiful appearance,no noise,maintenace free and long service life.

Techinical parameters:
Model:BF-S-300
Generator Type: permanent magnetic direct drive generator, 3 phase AC

Power
300
Rated wind speed
(m/s)
8-10
Rotor diameter
(m)
1
Start-up wind speed
(m/s)
2.2
Height of blade
(m)
1.2
Range of working wind speed(m/s)
2.2-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/2
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
150r/min
Output Voltage
AC12/24V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
40%-45%
Sweep wind area(m²)
1.1304
Range of working temperature
-45-60
Suggested supporting battery
2pcs12v100ah
Top weight (kg)
35
Tower type and height
Guy cable tower/8m
Note:

1. Tower type and tower height can be changed as per your request.
2. Working voltage can be special requested.
3. CE,ISO9001:2008
4. For the power curves and details,please feel free to contact me.

BF-S 300W vertical wind generator

BF6L913 Diesel engine

BF6L913 Diesel Engine
(1) Air-cooled diesel engine
(2) 6cylinder,4stroke
(3) Inspiration:Natural intake
(4) ISO9000
MODEL OF DIESEL ENGINE
BF6L913
NUMBER OF CYLINDER
6
NUMBER OF STROKE
4
COOLING WAY
AIR-COOLED
RATED POWER
1500/1800
CHAMBER TYPE
DIRECT INJECTION
BORE/STROKE(mm)
102/125
DISPLACEMENT(L)
6.128
AUTOMOTIVE POWER
AS PER DIN70020 (kW(PH)/r/min)
118(160)/2800
ISO 3046/(IFN )NET
BRAKE FUEL STOP POWER
(kW(ps)/r/min)
MAX POWER HIGHLY INTERMITTENT
118(160)/2800
MAX POWER INTERMITTENT
109(148)/2500
ISO STANDARD FUEL STOP POWER (ICFN)
kW(PH)/r/min MAX
99(135)/2300
kW(PH)/r/min MIN
70(95)/1500
MAX.YORQUE AS PER DIN70020 (N.m/r/min)
510/1700
NET WEIGHT(kg)
515
DIESEL ENGINE SUPPORT SPACE(Dmm)
842
TYPE OF STANDARD FLYWHEEL CASING(SAE)
2+3+4
STARTING WAY
ELECTRIC
LUBRICATING WAY
PRESSURE LUBRICATION
ROTATION DIRECTION
COUNTER-CLOCKWISE
NET DIMENSION(L×W×H)(mm)
1155×711×919
PISTON VELOCITY(m/s)
6.25/7.5

BFM High voltage shunt power capacitor

Typical applications: Mine power system, oilfield harmonics filtering sets system, high voltage power var compensating sets, SVC
Electrical characteristics
Capacitor Type
All film capacitor
Var power Qn
20~334kvar,Other capacity on request.
Tolerance on Cn
-5%~+10%
AC voltage range Un
6.6/√3~12kv,Higher voltage on request
tanδ/ Loss factor tanδ
<0.0005(At 20°C,50/60 Hz, Un)
Maximum Voltage Umax
1.1Un
Maximum Imax
1.5In
Ambient temperature
-40°C~+45°C
Ambient humidity
≤85%
Permit height above sea level
1000m, Higher height on request
Impregnant
PXE or PEPE NO PCB
Pphases
Single or 3 phases
Discharge resistor and fuse
On request.
Shell
Steel or stainless steel
Working conditions
Indoor or Outdoor
Standard reference
GB/T11024.1-2001; IEC60871-1:1997

BORAY Silent Type diesel generator

BORAY Silent Type Generator
Diesel engin drive
Stable electrical poweroutput
Low running sound level
Easy RoutineMaintenance
BORAY Silent Type diesel generator

Generator Performance Feature

·Engine and alternator shall be mounted on a same frame steel skid.
·Built-in damper for anti-vibration.
·Small size, low weight, easy to operating, installation and maintenance.
·World most famous brand diesel engine.
·World famous brand AC alternator: Stamford, Marathon, Leroy Somer, MVC.
·Advanced and reliable control module: Key start, Auto start, Remote control by PC with RS232/485
·Full range protect function and alarm shutdown feature.

Back Pressure Steam turbine

Back pressure Steam turbine for power plant:
1. High efficiency
2.Low requirement
3.Easy installation
4.Reliable operation
Back Pressure Steam turbine:
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Fossil steam turbine
No.
Power grade
Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine

Back Pressure Steam turbine

Back Pressure Steam turbine for power plant:
1. High efficiency
2.Low requirement
3.Easy installation
4.Reliable operation
Back Pressure Steam turbine:
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Fossil steam turbine
No.
Power grade
Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine

Back pressure Steam turbine (modular series)

Back pressure Steam turbine:
1. High efficiency
2.Low requirement
3.Easy installation
4.Reliable operation
Geothermal Steam turbine (modular series):
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Fossil steam turbine
No.
Power grade
Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine

Back pressure steam turbine

Back pressure steam turbine applying in variours industries.

1. Cogenerating steam turbine, working as a main mover in a thermal power station and having a broad range of application in variours industries.

2. Power up to 30MW, covering various inlet and exhaust conditions.

3. Additional fixed bleed points.

4. Simple construction, convenient installation, smooth running and high efficiency.

10KW off-grid horizontal axis wind-driven generator

1.vertical wind turbine ,wind generator system
2.High Efficiency & Reliability
3.CE .ROSH
4.over 20 years lifetime
wind-electric equipment wind-driven generator .wind turbine generator . vertical wind turbine generator . solar wind turbine . wind turbine system .

OFF-GRID WIND GENERATOR SYSTEM SP-10000W

Characteristics

Rated power (W)
10000
Max power (W)
12500
Rated voltage (VDC)
240
Start -up wind speed m/s
2
Rated wind speedm/s
10
Rated rotate speed r/m
180
Number of blades
3
Wheel diameter (m)
8
Tower height (m)
12
Net weight of body (kg)
387
Operation temperature ()
-4060
Working noise (db)
82
Power per month (b) (kWh)
2000(a)
Suggested battery capacity
40×12V200AH

Notes:
(a) Nine meter away from generator at 12m/s of wind speed.
(b)Average wind speed is 12m/s daily,amount of available hours in one
Month is 200h.

Back pressure steam turbine

Back pressure steam turbine:
1.High efficiency
2.Low requirement
Back pressure steam turbine:
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Fossil steam turbine
No.
Power grade
Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine

Back pressure steam turbine

Back pressure steam turbine applying in various industries

1. Cogeneration of heat and electric power.

2. Automatic pressure regulation.

3. Suitable for various working conditions and speeds.

4. Additional non-automatic extraction.

5. DEH or fully hydraulic governing system.

6. Easy and convenient installation.

7. Stable and reliable operation.

8. Applicalbe to drive a generator or other machinery.

Back pressure steam turbine

Back pressure steam turbine:
1.Compact design
2.Can be adjusted
3.Wide application
Back pressure steam turbine:
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Fossil steam turbine

No.
Power grade
Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
The turbine uses a full hydraulic governing system and provides the protection devices that have difference functions, also the electrical governing system is provided in accordance with the customer.

Back pressure steam turbine

Steam turbine:
1.Operating reliably and easy to operate
2.Protective system with complete
Steam Turbineet dailed product description:
We can supply all types of turbines ranging from 500KW to 660MW, including condensing steam turbine, back pressure steam turbine, extraction condensing steam turbine, double extraction condensing steam turbine, extraction back pressure steam turbine and other mixed pressure steam turbines, low-level recovery steam turbine and geothermic steam turbine. Moreover, we can supply all kinds of industrial steam turbines.
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.

The steam turbine we supplied adopts the technology of Mtsubishi (Japan) and Siemens (Germany).Equipped with the American WOODWARD electro-hydraulic control system and the instrument of BENTLY, our products have been exported to India, Indonesia, Thailand, Pakistan, Malaysia and other countries. They are widely applied in petroleum, chemical industry, textile industry, cement industry, paper mill, sugar mill, steel mill, garbage disposal industry and have got the excellent performance.

Features:
1. Single-stage and multistage are all fittings selection.
2. Power is between 100KW to 100MW, it can meet the needs of various industries and conditions’ uses.
3. Operating reliably and it is easy to operate.
4. Single-stage has a simple structure, therefore it is convenient to install and the adaptability is well.
5. Adopt DEH or full hydraulic governing system.
6. Protective system with complete functions.

Balance Of Power plant

Balance Of Power plant:
1.Quality guranteed
2.Diversified choices
3.Quick delivery
Balance Of Power plant:
Technology for steam turbine used in power plant has become mature, and Runh is capable of supplying different models of steam turbines, like condensing, air-cooled, heat supply, back pressure ones. The ultra supercritical steam turbines, supercritical steam turbines, subcritical steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine of different capacities ranging from 60-1000mw are all available in Runh.
Parts of different types matched with the turbines are available in Runh.
Fossil steam turbine

No.

Power grade

Unit type
1
1000MW
Ultra supercritical condensing steam turbine
2
660MW
Ultra supercritical, supercritical, subcritical condensing steam turbine, air-cooled steam turbine, supercritical air-cooled steam turbine
3
300MW
Subcritical condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
4
200MW
Hyper pressure condensing steam turbine, heat supply steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
5
135MW
Hyper pressure condensing steam turbine, extraction condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
6
60MW
Hyper pressure condensing steam turbine, air-cooled steam turbine, air-cooled heat supply steam turbine
.

Beautiful Solar Garden Light Lamp

solar garden light
1.CE,ISO9001,ROHS Approved
2.100,000 hours working time
3.80% energy saving
4.Pollution-free
solar garden light

Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.

Beautiful wind generators

Beautiful wind generators
(1)No iron core permanent magnet wind power
(2)Landscape shape design
Beautiful wind generators

Hangzhou Shenle Technology Co., Ltd. is committed to

(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator

Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting

Below HF19.0-50KW -TSSE100045

Below HF19.0-50KW
title
HF19.0-50KW
power
50KW
blade diameter
19.0
r/min
100
rated speed
12 m/s
rated power
50KW
max power
60KW
output voltage
380V
start up wind speed
3m/s
work speed
3-30m/s
security wind speed
3-30m/s
high of tower
18m
top quality except tower
980kg
tower type
450
output controller system
charge control and invertor syeterm
Suggested batteries and its capacity
12V200AH 112pcs
can supply power for
village

Best price 10kw wind turbine generator CE prove+5 years warrant

-PLC control system
-Touch screen&remote control
-Low noise with SKF bearings
-Smart Yawshaft system
-Best price

Notice: Hummer 30kw wind generator has 5 years warrant, life long professional service

Detailed Product Description

10KW wind generator
Siemens PLC Control system
Touch screen for remote control
Low noise with SKF bearings
Smart yawshaft
10KW wind generator

rated power
10000w
max power
15000w
battery bank voltage VDC
240
system output voltage VAC
380
start up wind speed
3m/s
rated wind speed
10m/s
working wind speed
3-25m/s
survival wind speed
50m/s
generating efficiency
above 0.85
wind energy utilizing ratio
0.4
generator type
PMG
blade material and quantity
GRP/3
speed regulation method
yawing, electromagnetism braking
shutting down method
manual and automatic
1. guy tower, free standing tower, hydraulic tower optional.
2.wind vane and anemometer indicating wind direction and measuring wind speed, transmitting wind signal to PLC controller.
3. yaw shaft with the slip ring to ensure the rotation at 360 circulation.
4.Siemens PLC controller receiving wind signal and operation signal, quick in reaction, reliable and intelligent.
5.rectifier, dump load, inverter seperately equipped.
6.rectifier rectifying and controlling the dumping load.
7. dumping load made of metal box, heat dissipation by air convection, without the fan and the controlling box.
8. off grid inverter adopting SPWM technology, amorphous transformer and high frequency breaker, with high converting efficiency, outputting stable frequency and voltage, filtering out noise, low distortion of pure sine wave.
9. hydraulic brake optional.

Best price 1kw household wind turbine,wind generator 5 years warrant

1) mini & high efficiency for home use
2) 7 patents and CE certificated
3) reliable quality and best price
4) easy erection

The Model Hummer
H3.1-1000W Wind Turbine Generator
has the great advantages of high efficiency and low rated wind speed. It introduces several patented technologies and uses some special materials.

The off-grid controller adopts the integrated design which consists of the controlling, inverting and load-diverting parts. It fulfills the functions of charging and protection for over charging/discharging, over-loading and short circuit, also supplies a diversion load. The controller outputs sine wave and has a spare interface for solar energy. Without especial fixation, the controller for 1000W could be connected to the solar panel within 400W.

It can drive air-condition (1 horsepower), pump or other electrical appliances (≤1KW).
Well used in:
Housing
Telecommunications Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station

Technical

parameters
Rated power (W)
1000
Maximum output power (W)
2000
Charging voltage(V)
DC 60
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
10 (3.1m)
Start-up wind speed (mph)
7 (3.0m/s)
Rated wind speed (mph)
20 (9.0m/s)
Rated rotating rate (r/min)
500
Wind energy utilizing ratio (Cp)
0.45
Generator output
Frequency conversion AC
Output AC frequency (Hz)
0~400
Rated charging current (A)
16.7
The maximum charging current(in a short time)(A)
30
Generator efficiency
>0.8
Tower diameter (in.)
ø3.5*78.7*0.1 (ø89*2000*3.5 mm) (4pcs)
Tower height (ft.)
26 (8m)
Weight of generator (lb)
33 (15kg)
Suggested Battery (Ah)
120/150

10KW three phase generator

generator
1.100% Copper wire,100% output
2.Factory price,100% LC payment
3.CE,CCC,ISO
4.Fast delivery,1000hrs warranty
10KW three phase generator

The STC series generators is to be used in town, countryside, work sites, mountain districts and pasture lands as an electric power source for lighting purpose. It can also be used as a standby power source for emergent case.
The generator is of disproof with rotary field type and adopts harmonic excitation system that will be easy to operate and simple to maintain.
The ST series generators are mainly designed to serve as power source of small capacity which supply electricity for lighting purpose in ships as well as for household electric devices used in towns or villages. The generators are excellent in appearance, consolidate in construction and easy to maintain. Dimensions adopt IEC standard. They are suitable for Australia, Europe, America and other countries if the end covers are mabel B.
The generator adopt harmonic wave self-excitation constant voltage system and automatic voltage control excitation constant voltage system, both of them have excellent dynamic characteristic performance, convenient and reliable in operation.

Operating Conditions
Ambient temperature: -15ºC≤q≤40ºC
Above sea level: not exceed 1000m
Rated voltage: ±5%

Technica Data
Model
Ouput (kw)
Rated Capacity
(KVA)
Rated Current
(A)
Pole number
Rated Speed
r.p.m
STC-3
3
3.8
5.4
4
1500
STC-5
5
6.3
9
STC-7.5
7.5
9.4
13.5
STC-10
10
12.5
18.1
STC-12
12
15
21.7
STC-15
15
18.8
27.1
STC-20
20
25
36.1
STC-30
30
37.5
54.1
STC-40
40
50
72.2
STC-50
50
62.5
90.2
STC-64
64
80
115.5
STC-75
75
93.8
135.3

Best quality 24V 500w mini wind turbine generator, wind power generator

-5 years warrant
-Touch screen&smart system
-Low noise&start-up speed, high efficient
-Professional service& best price
Detailed Product Description
off-grid 500W wind generator
Hummer 500w wind power generator is the smallest one in production at present .

It gives you a clear look how small Hummer wind power generator is ,which is able to be placed inside nose cone .

Though very small , compared with traditional turbine ,its stronger power making ability has won Hummer's reputation in market .

Refined material ,strong structure and mature techniques ensure its toughness in wild filed .

Due to its small size and light weight ,thus easy to carry ,it is a favor to people who often travel ,places that do not require high power supply ,like observation site ,military post and TV transmission station .

The main technical of 500w wind power generator is :
Rated power(W)
500
Maximum output power(W)
1000
Charging voltage (V)
DC 24
Blade quantity
3
Blade material
GRP
Blade diameter(m)
2.7
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
7.0
Rated rotating rate (r/min)
600
Wind energy utilizing ratio (Cp)
0.48
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~300
Rated charging current (A)
16.7
The maximum charging current (in a short time )(A)
25
Generator efficiency
>0.78
Tower diameter(mm)
76*2000*3 (3pcs)
Tower height(m)
6
Generator weight (kg)
6.5
Battery 12V 150Ah/200Ah
2pcs

Best quality 24V 500w mini wind turbine generator, wind power generator

Hummer 500w mini wind generator is famous for small, light and high efficiency.
Detailed Product Description
off-grid 500W wind generator
Hummer 500w wind power generator is the smallest one in production at present .

It gives you a clear look how small Hummer wind power generator is ,which is able to be placed inside nose cone .

Though very small , compared with traditional turbine ,its stronger power making ability has won Hummer's reputation in market .

Refined material ,strong structure and mature techniques ensure its toughness in wild filed .

Due to its small size and light weight ,thus easy to carry ,it is a favor to people who often travel ,places that do not require high power supply ,like observation site ,military post and TV transmission station .

The main technical of 500w wind power generator is :
Rated power(W)
500
Maximum output power(W)
1000
Charging voltage (V)
DC 24
Blade quantity
3
Blade material
GRP
Blade diameter(m)
2.7
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
7.0
Rated rotating rate (r/min)
600
Wind energy utilizing ratio (Cp)
0.48
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~300
Rated charging current (A)
16.7
The maximum charging current (in a short time )(A)
25
Generator efficiency
>0.78
Tower diameter(mm)
76*2000*3 (3pcs)
Tower height(m)
6
Generator weight (kg)
6.5
Battery 12V 150Ah/200Ah
2pcs

Best quality street lamp with wind solar hybrid power system

1.CE,ISO9001 Approved
2.15 years working time
3.Auto light on/off, auto lighting adjust
4.Pollution-free maintance-free

Brief introduction

The electricity from wind generator and solar panels charges the batteries after being rectified and powers the light. The solar energy as complementary when no wind or low wind, wind energy as complementary when no sunlight or poor sunlight; the wind-solar complementary with independent power supply.

Hummer wind solar hybrid street lamp has a reliable quality and 15 years long life span, all part have passed CE certificate. Wind solar hybrid street lamp not only free from grid and save energy, but also become a beautiful landscape of the city.

Detailed Product Description
good quality wind-solar street light
1.Smaller.lighter.lower noise
2.Higher efficiency&smart yawshaft
3.Green and new energy

Road
Type
wind
generator
(W)
Solar Panel
Fits
LED
light
Brightness
illuminance
ingress protection
Solar(W) for
Single LED Lamp
Solar(W) for
Double LED Lamp
Power
(W)
average luminance Lav (Cd/m)
uniformity Lmin/Lav
average illuminance
Eav(Lx)
Uniformity Emin/Eav
Sub-Primary Road
400
60-80
120-150
30-45
0.5
0.35
8
0.35
IP65

The main technical data of Hummer 500w home wind turbine is :
Rated power(W)
400
Maximum output powerW
800
Charging voltage (V)
DC 24
Blade quantity
3
Blade material
GRP
Blade diameterm
2.7
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
7.0
Rated rotating rate (r/min)
600
Wind energy utilizing ratio (Cp)
0.48
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~300
Rated charging current (A)
15
The maximum charging current (in a short time )(A)
25
Generator efficiency
>0.78
Tower diameter(mm)
76*2000*3 (3pcs)
Tower height(m)
6
Generator weight (kg)
6.5
Battery 12V 150Ah/200Ah
2pcs

Big diameter high pressure SMLS alloy pipe

1.High pressureSMLS alloy pipe
2.Min.order:5tons
3.FOBprice:1500-5000USD/ton
4.Production capacity:30000tons/month

Specifications
China Standard
Steel Grade
Standard
Seamless Steel Tubes
and Pipes for
High Pressure Boiler
GB5310-1995
20G, 20MnG, 25MnG, 15MoG, 20MoG, 12Cr1MoVG, 15CrMoVG, 12Cr2MoG, 12Cr2MoWVTiB, 12Cr3MoVSiTiB,
ASTM A106-96a
ATSM A213-95a
JIS G3461-1988
JIS G3462-1998
DIN 17175-1979
BS3059Part 21990
Seamless Steel Tubes
for low and Medium Pressure Boilers
GB3087-1999
10, 20
ASTM A179, ASTM A192
ASTM SA179,SA192,
BS3059

Big diameter low pressure welded Carbon steel pipe

1.Low pressure welded CS pipe
2.Min.order:5 tons
3.FOB price: 1000-1380USD/ton
4.Production capacity:30000tons
5. 1/2"-70"
Specifications
China Standard
Steel Grade
Standard
Seamless Steel Tubes
and Pipes for
High Pressure Boiler
GB5310-1995
20G, 20MnG, 25MnG, 15MoG, 20MoG, 12Cr1MoVG, 15CrMoVG, 12Cr2MoG, 12Cr2MoWVTiB, 12Cr3MoVSiTiB,
ASTM A106-96a
ATSM A213-95a
JIS G3461-1988
JIS G3462-1998
DIN 17175-1979
BS3059Part 21990
Seamless Steel Tubes
for low and Medium Pressure Boilers
GB3087-1999
10, 20
ASTM A179, ASTM A192
ASTM SA179,SA192,
BS3059

Friday, October 7, 2011

Big diameter medium pressure welded Carbon steel pipe

1.Medium pressure welded CS pipe
2.Min.order:5 tons
3.FOB price: 1000-1380USD/ton
4.Production capacity:30000tons
5.1/2"-70"
Specifications
China Standard
Steel Grade
Standard
Seamless Steel Tubes
and Pipes for
High Pressure Boiler
GB5310-1995
20G, 20MnG, 25MnG, 15MoG, 20MoG, 12Cr1MoVG, 15CrMoVG, 12Cr2MoG, 12Cr2MoWVTiB, 12Cr3MoVSiTiB,
ASTM A106-96a
ATSM A213-95a
JIS G3461-1988
JIS G3462-1998
DIN 17175-1979
BS3059Part 21990
Seamless Steel Tubes
for low and Medium Pressure Boilers
GB3087-1999
10, 20
ASTM A179, ASTM A192
ASTM SA179,SA192,
BS3059

Biogas Generator Set (24kw-800kw)

1) Biogas Generator Set (24kw-800kw)
2)Engine: Omnitek
3)Power: 25kva-1000kva
4)Start: electric
5)Output: 3ph AC 50hz 60hz
Biogas Generator Set (24kw-800kw)

1)LPG or Natrual Gas or biogas Generator Set
2)Engine: Omnitek
3)Power: 24kw-800kw 25kva-1000kva
4)Start: electric
5)Output: 3-phase AC 50hz or 60hz
6)Alternator: Engga, Marathon or Stamford
7)electric speed governor

Prime
Standby
Gas consumption
Lub Consumption
Engine
Model No.
kW
kW
m
3
/h
L/h
Model
PFO30-T
24
26
7.5
0
OM4NG5-27G
PFO38-T
30
33
9.6
0.1
OM4NG5-33G
PFO50-T
40
44
13
0.1
OM4NG5-44G
PFO63-T
50
55
17
0.1
OM6NG5-55G
PFO75-T
60
66
20
0.1
OM6NG5-66G
PFO100-T
80
88
26
0.1
OM6NG5-88G
PFO125-T
100
110
33
0.2
OM6NG5-110G
PFO150-T
120
132
40
0.2
OM6NG6-134G
PFO188-T
150
165
50
0.3
OM6NG6-165G
PFO200-T
160
176
53
0.3
OM6NG6-178G
PFO225-T
180
200
60
0.4
OM6NG7-200G
PFO250-T
200
220
66
0.4
OM6NG7-220G
PFO313-T
250
275
83
0.6
OM6NG8-278G
PFO375-T
300
330
99
0.7
OM6NG8-330G
PFO438-T
350
390
117
0.8
OM6NG11-390G
PFO500-T
400
440
132
0.9
OM6NG11-440G
PFO563-T
450
495
149
1
OM6NG11-500G
PFO625-T
500
550
165
1.2
OM6NG11-555G
PFO750-T
600
660
198
1.4
OM12NG12-660G
PFO875-T
700
770
231
1.6
OM12NG12-770G
PFO1000-T
800
880
264
1.9
OM12NG12-880G

Biomass Gasification Power Generation System

The biggest and most professional complete biomass gasification power plant supplier in China.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.

Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.

Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).

Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.

Biomass Gasification Power Plant 100KW-20000KW

Biomass Gasification station

Biomass Gasification station
1.Biomass material gas supply system
2.Energy saving, turning waste into wealth
Raw material gas supply system consists of feeder, gasifier, cyclone, scrubber, vacuum, clean separation, gas storage tank, pipe network and other components, as compared with ordinary small biomass gasifier gas supply In addition to the huge system specifications, but also with automatic devices and large-capacity gas storage cabinets, gas supply of biomass materials engineering systems with straw gasification, gas cleaning, automatic separation of functions. Biomass raw material (straw) into a combustible gas, and automatically import the resulting gas separation system produces high-quality purified gas cleaning device, the user can be an endless supply of quality gas and transported through the pipe network to the user terminal, with in daily life, water heating, cooking, cooking, heating, bathing, etc., burning is complete, great savings and replacing coal, gas, natural gas, electricity and other energy sources.
Biomass gasification gas technology can not only effectively reduce the traditional rural past environmental pollution caused by burning Tuzao, but also can improve the biomass energy conversion efficiency, can significantly improve conditions in rural areas and farmers with the quality of life, is a farmer, said to be as "one ignition, household cooking," enrich the people of rural renewable energy projects.
Biomass (straw) biomass gasification is a thermochemical conversion technology, the basic principle is that under the conditions of incomplete combustion of biomass raw material heated to a high molecular weight organic hydrocarbon cracking, become more low molecular weight CO, H2, CH4 and other combustible gases. Biomass from carbon, hydrogen, oxygen and other elements and ash composition, when they are lit, only a small amount of air supply and control the reaction process, the carbon and hydrogen into the carbon monoxide, hydrogen, methane and other components of the combustible gas, straw Most of the energy is transferred to the gas, which is the gasification process. Removal of combustible gas in the ash, tar and other impurities into the farmers through the supply system at home, the user opens the valve, ignite gas stove, you can boil water to cook.

10KW three phase stc alternator

stc alternator
1.100% Copper wire,100% output
2.Factory price,100% LC payment
3.CE,CCC,ISO
4.Fast delivery,1000hrs warranty
10KW three phase stc alternator

The STC series generators is to be used in town, countryside, work sites, mountain districts and pasture lands as an electric power source for lighting purpose. It can also be used as a standby power source for emergent case.
The generator is of disproof with rotary field type and adopts harmonic excitation system that will be easy to operate and simple to maintain.
The ST series generators are mainly designed to serve as power source of small capacity which supply electricity for lighting purpose in ships as well as for household electric devices used in towns or villages. The generators are excellent in appearance, consolidate in construction and easy to maintain. Dimensions adopt IEC standard. They are suitable for Australia, Europe, America and other countries if the end covers are mabel B.
The generator adopt harmonic wave self-excitation constant voltage system and automatic voltage control excitation constant voltage system, both of them have excellent dynamic characteristic performance, convenient and reliable in operation.

Operating Conditions
Ambient temperature: -15ºC≤q≤40ºC
Above sea level: not exceed 1000m
Rated voltage: ±5%

Technica Data
Model
Ouput (kw)
Rated Capacity
(KVA)
Rated Current
(A)
Pole number
Rated Speed
r.p.m
STC-3
3
3.8
5.4
4
1500
STC-5
5
6.3
9
STC-7.5
7.5
9.4
13.5
STC-10
10
12.5
18.1
STC-12
12
15
21.7
STC-15
15
18.8
27.1
STC-20
20
25
36.1
STC-30
30
37.5
54.1
STC-40
40
50
72.2
STC-50
50
62.5
90.2
STC-64
64
80
115.5
STC-75
75
93.8
135.3

Biomass Gasification station

Biomass Gasification station
1. suitable for many kinds of biomass
2. can be used for cooking, heating
3. can save your cos

Biomass gas supply system consists of feeder, gasifier, cyclone, scrubber, vacuum, cleaning separators, storage gas tank, pipeline network etc., as compared with ordinary small biomass gasifier gas supply
system in addition to the huge size, but also with automatic devices and large-capacity storage gas holder, gas supply of biomass materials engineering systems with straw gasification, gas cleaning, automatic separation of functions.
The biomass (straw) into combustible gas, and automatically generate the gas into separation system produces high-quality purified gas cleaning device, the user can supply a steady stream of high-quality gas, and transport through the pipe network to the user terminals, with
boil water in daily life, cooking, cooking, heating, bathing, etc., burning is complete, greatly saving and substitution of coal, gas, natural gas, electricity and other energy.

Biomass gasification technology can not only effectively reduce the supply of rural tradition of past burning stove for cooking can be caused by environmental pollution, but also can improve the biomass energy conversion efficiency, can significantly improve conditions in rural areas and farmers with the quality of life, is a being
farmers called "one ignition every household cooking" in enriching rural renewable energy projects.

Biomass (straw) biomass gasification is a thermochemical conversion technology, its basic principle is incomplete combustion conditions, the biomass heating, so the organic high molecular weight hydrocarbon chain cracking into
low molecular weight of CO, H2, CH4 and other combustible gases.
Biomass from the carbon, hydrogen, oxygen and other elements and ash composition, when they are lit, only to supply a small amount of air and control the reaction process so that carbon and hydrogen elements into the carbon monoxide, hydrogen, methane and other combustible gas composition, straw
Most of the energy is transferred to the gas, this is the gasification process.
Removal of combustible gases in ash, tar and other impurities, by gas supply system into the rural households, the user opens the valve, ignite gas stove, you can boil water for cooking up.
Project's technical features and advantages
1.
Design Science, technology advanced

China Science and Technology Department experts on the products "of science and technology achievement appraisal" and concluded that: the right of the project approval, design principles used properly, reasonable structure, good results have been achieved at present leading domestic level.

2. safe for easy operation

The unit for the pressure equipment, production and high safety.
Ordinary farmers can be short-term training posts after operation, suitable for rural areas.
3.
save energy, protect the environment

First combustible materials using local resources, resource-rich, low-cost, alternative crops, straw, wood chips and other bio-waste as a raw material in rural areas, beneficial reuse of waste, improve capacity village village appearance; Second, to reduce air pollution caused by burning straw
gasification process is not outside the sewage to protect the ecological environment; Third, saving non-renewable energy sources such as coal.

4.policy support, economic, economic benefits

All levels of agriculture, technology, environmental protection, finance and other departments provide policy and fund support.
Users with a straw gas cost less than the cost of coal.
Implementation of cooking gas in rural areas, are clean, efficient, and fast, convenient and saves time and trouble to save money, and effort, not only to improve the quality of life of farmers, but also speed up the process of modern civilization in rural areas, for the construction of new socialist countryside creating conditions
.
5.
wide range of raw materials, can be seen everywhere

Crop straw, corncob, wood chips, tree and forestry, bamboo processing waste and combustible rubbish.

Biomass electric generator

1) Natural gas generator
2) High quality with CE certificate
3) High efficiency ,low noise
Biomass Gasification with Power Generation System

Preface:
The biomass gasification system produces a valuable gas named producer gas - “Syngas”
(Synthetic gas).
Materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks,
wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass.

This
system can produce electric power in the range of 200kW - 6.0MW by using a few parallel
modular units. Since Biomass itself is almost sulfur free, the gasification process will not
produce any sulfur oxide emissions (SOx). Similarly the gasification of biomass produces
very low concentrations of nitrous oxide emissions (NOx) when manufacturing the “Syngas”
and thereafter leads alsoto low emissions in the combustion engines.

System concept and efficiency:

The production of 1 KW of power requires only 1.30~1.85kg of rice husks, wood dust or
crop stalks as fuel. The water used in the cooling system of this process can be recycled after
undergoing a dissolved air flotation treatment and thereby having no harmful effects to the
ecological system and the environment. Self power consumption of this systems is low with
percentages ranging between 5~8% of the generated total power.

This project is an ideal solution for regions where there are large quantities of biomass waste
resources, farms, nearby forests etc.
In consideration of the above mentioned particulars, the feasibility of such Power station will
give a high ROI (Return of Investments) in a short period of time. The reasoning to this high
ROI is due to the cost of the fuel being negligible-near ZERO (0), only labor, drying and
grinding has to be considered. In most other power stations, fuel cost corresponds to
approximately 60-75% of power selling price, in our case, there is a saving of approximately
70% compared with other forms of power stations.

The technology of producing power by gasification of biomass is easy to operate, simple and
economical in maintenances and service, has no high pressure steam, no turbines and is easy
to start up and run the standard combustion generator.
The power station requires a small land area to operate. It is environmental-friendly, simple
to install, and it can gasify most kinds of agricultural and forestry biomass. These will in turn
produce very low cost valuable electric power energy.

For more information ,you are welcome to visit our website:
http://greenpowersystem.en.alibaba.com
or
http://www.greenpowergpe.cn

Biomass electric power generator 100KW-20000KW

Biomass gas generator set 50KW-1200KW

Supply Biomass gas generator set ,50,100,150,200,300,400,500,600,800,1000,1200KW.The biggest gas engine supplier in China.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.

Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.

Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).

Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.

Biomass gasification generation system 100-20000KW

20 Years Biomass Gasification power plant EPC experience(Circulating fluidized bed(cfb) gasifier and fixed bed gasifier.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.

Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.

Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).

Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.

Biomass gasification power generation in energy

Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow

Biomass gasification power generation

We can provide turnkey solution for building 12MW, 18MW and 30MW biomass power plants
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflo

Biomass gasification power plant

Biomass gasification power plant
a.supply power up to 8MW
b.material:rice husk,wood scrap,cotton stalk ...
c.high quality an
Biomass gasification power plant

Our biomass power plant produces a valuable gas named producer gas- Syngas (Synthetic gas ). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.

Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.

Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and thereafter leads also to low emissions in the combustion engines.

Biomass gasifier power generation system.600KW~1000KW

Biomass gasifier with fuel of agriculture and forest residues, such as rice husk, crop stalk, coconut husk, bagasse, woodchip
biomass gasifier specifications

Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory gasification for power generation.
Biomass syngas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or to turbine to generate power.

INDEX:
MODEL:LHC-1000
generator rated output power :100~500KW
production volume of biomass gas 2250Nm/3hr
gas temperature of the outlet after cleaning and cooling :under 45 degree celsius
consumption of bimass fuel:0.9-1.8ton/hr (for rice huse)
weight:20-100ton.

main componet and caloricity of diomass gas are different for difference of characteristic of biomass fuel gasification method.the caoricity of biomass of gasication is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3.)

biomass gas component:
CO:17.2%
H2:4.05%
CH4:6.82%
CmHn:1.24%
H2S:------
CO2:15.1%
O2:0.8%
N2:54.7%

Biomass gasifier

.the biomass gasifier
the machine is used for producing the gas...
the Biomass gasifier
Biomass gasifier.It can supply gas with high quality for generator set,boiler,fan heater,drying machinery,etc
Model
Gas output
Gas calorific value

Efficiency of gasification

Draught fan Power

Material amount
FOB Price
REMARK
TW-50A
50m
3
/h

4600-5200
KJ/m
3

72%

220V 380V

25-30Kg/h

FIXED BED
15kw generator
TW-50B
50m
3
/h

4600-5200
KJ/m
3

72%

220V 380V

25-30Kg/h

Fluidised bed
15kw generator
TW-100A
100
m
3
/h

4600-5200
KJ/m
3

72%

220V 380V

50-60Kg/h

FIXED BED
30KW generator
TW-100B
100
m
3
/h

4600-5200
KJ/m
3

72%

220V 380V

50-60Kg/h

Fluidised bed
30KW generator

1-50MW Biomass fired Turnkey CHP Power Plant

-Applicable fuel: rice husk, wood chips,straw, saw dust, etc
-Capacity: 1-50MW
-Type of plant: CHP, EPC project
1. introduction
We are specialized in manufacturing and installation of power plant equipment with EPC (Engineer, procure and construct) qualification. We could take power plant turnkey project ranging from 1MW to 50MW.

Based on the advanced Denmark boiler Manufacturing Technology, our company has independently developed the Large Ladder Reciprocating Grate Boiler (LLRGB). After repeated researches and feedbacks from established plants, the LLRGB has been applied in the field of biomass power generation and got patent on the grate. The LLRGB shows great advantages of stable combustion status, high combustion efficiency, strong fire-broadcasting ability, reliable operation status and low pollution level, etc. The most important point is that this type of boiler is suitable for various biomass fuels, such as rice husk, straw, branches, grass root, consumer waste and other biomass waste.

There is a bright future for developing straw particle fuel. The annual consumption of coal now in China is 2.6 billion ton, among which 1 billion is used in medium or small boilers that are major sources of greenhouse gases emission. If they take straw particles alternatively, the emission reduction benefit should not be underestimated. Jilin Hongri Biomass Fuel Company takes forestry debris as materials to produce particle fuel to substitute for petrol and supplies heat for Changchun four-star Jilongpo Plaza that covers an area of 45 thousand m
2
. Its thermal efficiency is 83% saving half of the cost with a distinct environment protection effect.

We are also a designer and manufacturer of power plant equipments including boilers, pressure vessels, power plant auxiliaries, etc. Our products have been applied widely in industries such as chemistry, petroleum, metallurgy, thermo-net engineering, electric power, etc.

10KW vertical axis wind power,wind generator

1.wind turbine generator ,wind power system .wind energy turbine
2..over 18 years life time
3. CE.ROSH
4.18 years warrant
H Model vertical axis wind-power turbine ,300W S model wind power system ,wind product ,wind system ,off-grid wind energy turbine ,wind power turbine wind energy turbine ,wind power turbine .wind turbine generator . vertical wind turbine generator . solar wind turbine . wind turbine system .

Model:SP-H-10KW
Generator Type: permanent magnetic direct drive VTAW, 3 phase AC

Power(w)
10000
Rated wind speed
(m/s)
12
Rotor diameter
(m)
6
Start-up wind speed
(m/s)
3.8
Height of blade
(m)
6.6
Range of working wind speed(m/s)
3.8-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/5
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
100r/min
Output Voltage
AC380/600V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
30%-40%
Sweep wind area
28.26
Range of working temperature
-45°C-60°C
Suggested supporting battery
32pcs12v200ah
Top weight (kg)
660
Tower type and height
Free standing tower/10m

Biomass generator 100KW-20000KW

Biomass generator system

1) Natural gas generator
2) High quality with CE certificate
3) High efficiency ,low noise
Biomass gasification power plant generatorPreface:

The biomass gasification system produces a valuable gas named producer gas - “Syngas”
(Synthetic gas).
Materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks,
wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass.

This
system can produce electric power in the range of 200kW - 6.0MW by using a few parallel
modular units. Since Biomass itself is almost sulfur free, the gasification process will not
produce any sulfur oxide emissions (SOx). Similarly the gasification of biomass produces
very low concentrations of nitrous oxide emissions (NOx) when manufacturing the “Syngas”
and thereafter leads to low emissions in the combustion engines.

System concept and efficiency:

The production of 1 KW of power requires only 1.30~1.85kg of rice husks, wood dust or
crop stalks as fuel. The water used in the cooling system of this process can be recycled after
undergoing a dissolved air flotation treatment and thereby having no harmful effects to the
ecological system and the environment. Self power consumption of this systems is low with
percentages ranging between 5~8% of the generated total power.

This project is an ideal solution for regions where there are large quantities of biomass waste r
esources, farms, nearby forests etc.

In consideration of the above mentioned particulars, the feasibility of such Power station will
give a high ROI (Return of Investments) in a short period of time. The reasoning to this high
ROI is due to the cost of the fuel being negligible-near ZERO (0), only labor, drying and
grinding has to be considered. In most other power stations, fuel cost corresponds to
approximately 60-75% of power selling price, in our case, there is a saving of approximately
70% compared with other forms of power stations.

The technology of producing power by gasification of biomass is easy to operate, simple and
economical in maintenances and service, has no high pressure steam, no turbines and is easy
to start up and run the standard combustion generator.

The power station requires a small land area to operate. It is environmental-friendly, simple
to install, and it can gasify most kinds of agricultural and forestry biomass. These will in turn
produce very low cost valuable electric power energy.

For more information ,you are welcome to visit our website: http://greenpowersystem.en.alibaba.com
or http://www.greenpowergpe.cn

Biomass power generation 100-20000KW

20 Years Biomass Gasification Power Plant EPC experience. The best Biomass Power Plant supplier in China.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.

Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.

Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).

Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.

Biomass power plant

Biomass power plant
We supply full set of biomass power plant!
This power plant is very environment and efficiency.
*Biomass power plant

The biomass power plant produces a valuable gas named producer gas - Syngas (Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200kW 6.0MW by using a few parallel modular units.

Since Biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SO
x
). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.

Similarly the gasification of biomass produces very low concentrations of nitrous oxide emissions (NO
x
) when manufacturing the Syngas and thereafter leads also
to low emissions in the combustion engines.

Biomass power plant

Biomass power plant
a.environmentally friendly
b.high efficiency
c.good service
d. high quality and reasonab
Biomass power plant :

Our biomass power plant produces a valuable gas named producer gas- Syngas (Synthetic gas ). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.

Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.

Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and thereafter leads also to low emissions in the combustion engines.