Cummins Power Generator

Cummins power generator
1.Low noise
2.High corrosion
3.Security and safety
4.Easy to operate, intallation and maintenance
Cummins Power Generator

Feature:
LOW NOISE
The wave muffler foam are mounted inside the enclosure
The frame and canopy are built with high-strengh material.
All doors and movable fixtures are designed to minimize vibration.
The canopy is designed as an acoustic chamber to reduce the noise.
Oversize muffler result in lower sound level.
A longer air filter intake hose is used to keep the low frequency noise down.

HIGHLY CORROSION RESISTANT CONSTRUCTION
Body made from special treated steel sheet.
Stainless steel or cast aluminium locks and hinges.
Zing plated or stainless steel fasteners.
2mm thick Sheet treated by grit blast Sa 2 1/2.
Two pack of epoxy paint system.

EXCELLENT ACCESS FOR MAINTENANCE
Full length extra wide doors on each side.
Doors top hung and supported by gas struts.
Top hinged doors provide a shelter when open.
Lude oil and cooling water drains poped to exterior of the canopy.

SECURITY AND SAFETY
Control panel viewing window to easily view status of generating set.
Emergency stop button mounted externally.,
Cooling fan and battery charging alternator fully guarded.
Exhaust silencing system totally enclosed for operator safety.

Engine Parametres:

1) Engine and alternator shall be mounted on a same frame steel skid
2) Built-in damper for anti-vibration
3) Small size, low weight, easy to operate, installation and maintenance
4) World most famous brand diesel engine: Lovol brand diesel engine
5) World famous brand AC alternator: Stamford
6
) Advanced and reliable control module: Key start, auto start
7) Full range protects function and alarm shutdown feature
8) According to professional standards
Alternator features:

1) Brush-less, 4 poles, rotation magnet
2) IP21-23 (NEMA1) enclosure is standard for all industrial alternators
3) The insulation system is class H
4) Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts
5) Wide range of flange adaptors and single bearing disc coupling
6) Standard 2/3 pitch windings avoid excessive neutral currents
Accessories:

1) Standard accessories: Common steel frame, circuit breaker, damper, exhaust silencer, flexible pipe, battery and connecting wires, operation manual and document
2) Optional accessories: Engine coolant and oil heater, alternator space heater, cooling for heat exchanger, control system with RS232/485, communication interface, battery charger by main supply, daily fuel tank, ATS and paralleling system, soundproof canopy and moving trailer.