1KW wind generator

1KW wind generator
1.Smaller.lighter.lower noise
2.Higher efficiency
3.Smart system
4.SCF technology&SKF bearings
1KW wind generator

Application of

Model H3.1-1KW
It can drive air-condition ( ≤20 horsepower), 6kw water pump or other resistive appliances (≤20KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping





Unique features
1. generator located inside nose cone to radiate heat easily, with generator itself extremely light and small, low in noise.
2. yaw shaft with the slip ring to ensure the rotation at 360 circulation.

3. tail ple and tial wing connecting with the body of wind turbine through SKF ball bearing, more endurable and strong.

4. tower made of galvanised steel anti acid proof and salt proof.

5. 3 in 1 inverter integrating the functions of battery charging, inverting, controlling. diversion lights included, a pare terminal of solar panel on the back.



rated power
1000w
max power
2000w
battery bank voltage
60v
blade quantity and material
3 pieces of reinforced fiber glass
start up wind speed
3m/s
rated wind speed
9m/s
rated rotating speed
500rpm
wind energy utilizing ratio
0.45
generaor output
single phase frequency conversion AC
output AC frequency
0--400
rated charging current
15A
max charging current in a short time
30A
generator efficiency
above 0.8
tower specification
diameter 89mm plus 4 segments each 2 meters
suggested battery
120AH/150AH