CE solar module laminator

The machine combine the manual mode, semi-automatic mode , full automatic mode in a whole.

SYSCF01 series full automatic solar laminator consist of 3 stages: stage A, stage B, stage C. Stage A is loading system, Stage B is the main machine, Stage C is unloading and cooling system. The machine combine the manual mode, semiautomatic mode , full automatic mode in a whole. The operate interface designing is humanized. The safety guard system is equiped with the machine . And the whole structure is regulated to facilitate the operation and promote work efficiency.


1.Specification
Type
Laminating area(mm)
Weight(T)
SYSC-F3422
3400×2200
16.5
SYSC-F3622
3600×2200
18.5
SYSC-F3624
3600×2400
19.5

2. Technical parameter
Power supply
380V 3 phase 5 wires (Can be customized)
Temperature control mode
Siemens self-tuning intelligent PID control
Pump speed
70L/S(customized)
Heating mode
Heat by SD320 oil
Work temperature range
Normal-180°C
Pumping time
5min(Adjustable),50-20Pa
Safety system
Temperature exceeding safety control system, voice alarm and alarm display systemEmergency cover opening system.
Control mode
Siemens S7-300 or S7-1200 PLC Siemens TP1500 Touch screen
Temperature uniformity
±1.5°C,multi-point temperature control
Temperature control precise
<±0.4°C
Work time
24 hours continueously
Height of Laminating cavity
40mm
Rubber board
Nonhazardous high temperature resist rubber board
Environment
Environment temperature 0-50°C,Relative humidity<90%

3.Main feature and advantage

3.1 High quality vacuum pump is adopted, and equiped with air filter device. Reduce the maintenance time for vacuum system
3.2 Temperature exceeding control system, voice alarm system and LED alarm display system are all measures for protect the staff and machine.
3.3 Adopt advanced device such as Siemens S7-200PLC/S7-1200PLC/S7-300PLC,touch screen or Siemens RACK industrial control computer and frequency inverter, compatible with automatization and informazation of PV enterprise.
3.4 Schneider low voltage element, EYENCE PV sensor and SMC vacuum system can ensure the solar laminator’s reliable operation.
3.5 Use flexible clamping fixture to replace the rubber sheet, the screw needn’t to be demounted or infixed .
3.6 Upper and lower Teflon sheet convey and clean system, the collecting bucket for waste materials is equiped. It is labour saving and efficiency.




CE certification