1 gasoline generator ,competitive price
2.certified engine
3.joint venture technique
4.ISO9001
company operation principles
1.gasoline generator with high quality and competitive price
provide the best quality products and nice price to customers
2.frank and honest
frankly and honestly treat to all the customers
3.respect people
respect every person anywhere,anytime
4.seek excellence
produce top quality products , provide good service , employ excellent people , ensure the efficient operation and development of company .
products features
specification
Model
ZTQF1200
ZTQF2500
ZTQF2500 AVR3
ZTQF3200
ZTF3500 DR
ZTQ3500 AVR3 DR
ZTQF7500-3
ZTQF7500D WR
Generator Specification
Genset Type
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
3-Phase
Single-phase
AC Frequency (HZ)
50
50
50
50
50
50
50
50
AC Voltage (V)
220V
220V
220V
220V
220V
220V
380V
220V
Cont.AC Output (KW)
1.0KW
2.0KW
2.0KW
2.5KW
2.8KW
2.8KW
6.5KW
6.5KW
Max.AC Output (KW)
1.2KW
2.2KW
2.2KW
2.8KW
3.0KW
3.0KW
6.7KW
6.7KW
Rated currenct(A)
3.6A
9
9
11
12
12
28
28
Max.current(A)
4A
10
10
12.5
13
13
29
29
Engine Specification
Engine Model
ZT154F
ZT170F
ZT170F
ZT170F
ZT170F
ZT170F
ZT190F
ZT190F
Power Factor (COS)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Bore*Stroke (mm)
52*46
70*54
70*54
70*54
70*54
70*54
90*64
90*64
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
105
210
210
210
210
210
419
419
Engine Speed (RPM)
3000
3000
3000
3000
3000
3000
3000
3000
Starting System
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start/ Electric start
Handle Recoil start
Handle Recoil start
(Electric start optional)
Electric start
Max .Power Output (HP)
2.5HP
7.0HP
7.0HP
7.0HP
7.0HP
7.0HP
15.0HP
15.0HP
Fuel Tank Capacity (L)
8L
15L
15L
15L
15L
15L
25L
25L
Cont. Operating (HRS)
10h
10h
10h
10h
10h
10h
10h
10h
Operating Noise Level (dB)
68dB
68dB
68dB
68dB
68dB
68dB
75dB
75dB
Automatic circuit protection device
Y
Y
Y
Y
Y
Y
Y
Y
Engine oil level warning alarm
Y
Y
Automatic Voltage Regulation
Y
Y
Y
Y
Y
Y
Saturday, July 23, 2011
air-cooled portable gasoline generator
1 portable gasoline generator ,competitive price
2.certified engine
3.joint venture technique
4.ISO9001
company operation principles
1.gasoline generator with high quality and competitive price
provide the best quality products and nice price to customers
2.frank and honest
frankly and honestly treat to all the customers
3.respect people
respect every person anywhere,anytime
4.seek excellence
produce top quality products , provide good service , employ excellent people , ensure the efficient operation and development of company .
products features
specification
Model
ZTQF1200
ZTQF2500
ZTQF2500 AVR3
ZTQF3200
ZTF3500 DR
ZTQ3500 AVR3 DR
ZTQF7500-3
ZTQF7500D WR
Generator Specification
Genset Type
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
3-Phase
Single-phase
AC Frequency (HZ)
50
50
50
50
50
50
50
50
AC Voltage (V)
220V
220V
220V
220V
220V
220V
380V
220V
Cont.AC Output (KW)
1.0KW
2.0KW
2.0KW
2.5KW
2.8KW
2.8KW
6.5KW
6.5KW
Max.AC Output (KW)
1.2KW
2.2KW
2.2KW
2.8KW
3.0KW
3.0KW
6.7KW
6.7KW
Rated currenct(A)
3.6A
9
9
11
12
12
28
28
Max.current(A)
4A
10
10
12.5
13
13
29
29
Engine Specification
Engine Model
ZT154F
ZT170F
ZT170F
ZT170F
ZT170F
ZT170F
ZT190F
ZT190F
Power Factor (COS)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Bore*Stroke (mm)
52*46
70*54
70*54
70*54
70*54
70*54
90*64
90*64
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
105
210
210
210
210
210
419
419
Engine Speed (RPM)
3000
3000
3000
3000
3000
3000
3000
3000
Starting System
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start/ Electric start
Handle Recoil start
Handle Recoil start
(Electric start optional)
Electric start
Max .Power Output (HP)
2.5HP
7.0HP
7.0HP
7.0HP
7.0HP
7.0HP
15.0HP
15.0HP
Fuel Tank Capacity (L)
8L
15L
15L
15L
15L
15L
25L
25L
Cont. Operating (HRS)
10h
10h
10h
10h
10h
10h
10h
10h
Operating Noise Level (dB)
68dB
68dB
68dB
68dB
68dB
68dB
75dB
75dB
Automatic circuit protection device
Y
Y
Y
Y
Y
Y
Y
Y
Engine oil level warning alarm
Y
Y
Automatic Voltage Regulation
Y
Y
Y
Y
Y
Y
2.certified engine
3.joint venture technique
4.ISO9001
company operation principles
1.gasoline generator with high quality and competitive price
provide the best quality products and nice price to customers
2.frank and honest
frankly and honestly treat to all the customers
3.respect people
respect every person anywhere,anytime
4.seek excellence
produce top quality products , provide good service , employ excellent people , ensure the efficient operation and development of company .
products features
specification
Model
ZTQF1200
ZTQF2500
ZTQF2500 AVR3
ZTQF3200
ZTF3500 DR
ZTQ3500 AVR3 DR
ZTQF7500-3
ZTQF7500D WR
Generator Specification
Genset Type
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
3-Phase
Single-phase
AC Frequency (HZ)
50
50
50
50
50
50
50
50
AC Voltage (V)
220V
220V
220V
220V
220V
220V
380V
220V
Cont.AC Output (KW)
1.0KW
2.0KW
2.0KW
2.5KW
2.8KW
2.8KW
6.5KW
6.5KW
Max.AC Output (KW)
1.2KW
2.2KW
2.2KW
2.8KW
3.0KW
3.0KW
6.7KW
6.7KW
Rated currenct(A)
3.6A
9
9
11
12
12
28
28
Max.current(A)
4A
10
10
12.5
13
13
29
29
Engine Specification
Engine Model
ZT154F
ZT170F
ZT170F
ZT170F
ZT170F
ZT170F
ZT190F
ZT190F
Power Factor (COS)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Bore*Stroke (mm)
52*46
70*54
70*54
70*54
70*54
70*54
90*64
90*64
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
105
210
210
210
210
210
419
419
Engine Speed (RPM)
3000
3000
3000
3000
3000
3000
3000
3000
Starting System
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start/ Electric start
Handle Recoil start
Handle Recoil start
(Electric start optional)
Electric start
Max .Power Output (HP)
2.5HP
7.0HP
7.0HP
7.0HP
7.0HP
7.0HP
15.0HP
15.0HP
Fuel Tank Capacity (L)
8L
15L
15L
15L
15L
15L
25L
25L
Cont. Operating (HRS)
10h
10h
10h
10h
10h
10h
10h
10h
Operating Noise Level (dB)
68dB
68dB
68dB
68dB
68dB
68dB
75dB
75dB
Automatic circuit protection device
Y
Y
Y
Y
Y
Y
Y
Y
Engine oil level warning alarm
Y
Y
Automatic Voltage Regulation
Y
Y
Y
Y
Y
Y
air-cooling and self humidification fuel cell
EOS 500 fuel cell system is a highly integrated fuel cell system with compact design and based on Pearl's PASH technology.
EOS-500Products characters:
Light weight and small size;
Low noise;
Simple system and high reliability;
Quick startup, good dynamic performance;
Excellent environment adaptability;
Simple control and communication policy.
EOS series
fuel cells are all based on Pearl's PASH technology. The unique technology can ensure fuel cells' stable operation in atrocious weather.
EOS 500
fuel cell system is a highly integrated fuel cell system with compact design, who includes: fuel cell stack, fans, IC board and electromagnetive valve.
EOS-500Products characters:
Light weight and small size;
Low noise;
Simple system and high reliability;
Quick startup, good dynamic performance;
Excellent environment adaptability;
Simple control and communication policy.
EOS series
fuel cells are all based on Pearl's PASH technology. The unique technology can ensure fuel cells' stable operation in atrocious weather.
EOS 500
fuel cell system is a highly integrated fuel cell system with compact design, who includes: fuel cell stack, fans, IC board and electromagnetive valve.
all kinds of maglev wind turbine
this kind vawt , we have technology patent , start wind speed is 1m/s , maglev wind turbine generate 3 phases alternate current
Rated Power:400W
Wind wheel diameter:1.20M/1.06M
Weight:25KG
Blade Material:Aluminum Alloy
The number of blade:3
Minimum wind speed start:1m/s
Minimum power wind speed:1m/s
Minimum charge wind speed:2.5m/s
Rated wind speed:8m/s
Maximum cut off wind speed:15m/s
Resistant to wind speed limit:65m/s
The type of Generator:
Three-phase AC maglev wind turbine
Controllor output voltage:12V
Controllor output current:lower than 20Amp
Controllor brake system: Over speed automatic Three-phase short-circuit braking
Normal operating temperature:-30~50 °C
Item
Horizontal axis (HAWT)
Vertical axis (EML)
Start wind speed
High(3m/s)
Low(1m/s)
Wind conditions required
Require stable wind direction
Any wind direction
Encountered turbulence
Reduce the efficiency
Efficiency is not affected
Power stability
Change by wind direction
Without any wind effect
Noise
Large(45 decibels or more)
Low noisy(because there is no
mechanical friction)
Product shape
Normal
Beautiful
Installation height
High(need to avoid the terrain
turbulence)
Low(not afraid of turbulence)
Installation location
Just in open area like suburb
Any location
Generator material
Plastic or composite
metal
Structure strength
Poor (easy to broken)
High(high strengthen )
Resistance of wind speed
Poor(about 40 m/s)
High(about 65 m/s)
Safety in utilization
poor
high
weight
about 20KG
about 38KG
Rated Power:400W
Wind wheel diameter:1.20M/1.06M
Weight:25KG
Blade Material:Aluminum Alloy
The number of blade:3
Minimum wind speed start:1m/s
Minimum power wind speed:1m/s
Minimum charge wind speed:2.5m/s
Rated wind speed:8m/s
Maximum cut off wind speed:15m/s
Resistant to wind speed limit:65m/s
The type of Generator:
Three-phase AC maglev wind turbine
Controllor output voltage:12V
Controllor output current:lower than 20Amp
Controllor brake system: Over speed automatic Three-phase short-circuit braking
Normal operating temperature:-30~50 °C
Item
Horizontal axis (HAWT)
Vertical axis (EML)
Start wind speed
High(3m/s)
Low(1m/s)
Wind conditions required
Require stable wind direction
Any wind direction
Encountered turbulence
Reduce the efficiency
Efficiency is not affected
Power stability
Change by wind direction
Without any wind effect
Noise
Large(45 decibels or more)
Low noisy(because there is no
mechanical friction)
Product shape
Normal
Beautiful
Installation height
High(need to avoid the terrain
turbulence)
Low(not afraid of turbulence)
Installation location
Just in open area like suburb
Any location
Generator material
Plastic or composite
metal
Structure strength
Poor (easy to broken)
High(high strengthen )
Resistance of wind speed
Poor(about 40 m/s)
High(about 65 m/s)
Safety in utilization
poor
high
weight
about 20KG
about 38KG
all types of turbine to meet requirement/impulse turbine
1) simplicity of installation & operation
2) high performance
3) precisely design&good looking
4) low cavitation coefficient
Impulse turbine manufactured by our company are used in various hydraulic power plants with a water head of 100-800m and discharge of 0.07-2m3.
We have our own factory and experienced engineers who resopndible for designing and supervising. Many forien guests are visit our company every year.
product model:
CJ22-W-45/1x4
CJ22-W-110/1x9A
CJA237-W-90/1x11A
CJA237-W-140/1x13
CJ22-W-45/1x4.5
CJ22-W-110/1x11
CJA237-W-90/2x9
CJA237-W-140/2x9
CJ22-W-45/1x4.8
CJ22-W-110/1x12
CJA237-W-90/2x11
CJA237-W-140/2x13
CJ22-W-55/1x5.5
CJ22-W-110/1x12A
CJA237-W-1000/1x9
CJA237-W-160/1x9
CJ22-W-55/1x5.5A
CJ22-W-110/1x13
CJA237-W-100/1x9A
CJA237-W-160/1x11
CJ22-W-55/1x6
CJ22-W-110/1x14
CJA237-W-100/2x9
CJA237-W-160/1x12.5
CJ22-W-55/1x7
CJ22-W-110/1x15
CJA237-W-100/2x9A
CJA237-W-160/1x13
CJ22-W-60/1x5
CJ22-W-110/1x16
CJA237-W-110/1x9
CJA237-W-160/2x9
CJ22-W-60/1x6
CJ22-W-110/2x11
CJA237-W-110/1x11
CJA237-W-160/2x13
CJ22-W-60/1x7
CJ22-W-110/2x13
CJA237-W-110/2x9
CJA475-W-140/1x12.5
CJ22-W-60/1x7A
CJ22-W-125/1x8-18
CJA237-W-110/2x11
CJA475-W-90/2x7
CJ22-W-70/1x7.8
CJA237-W-70/1x4.5
CJA237-W-125/1x9
CJA475-W-100/2x7
CJ22-W-70/1x9
CJA237-W-70/1x5.5
CJA237-W-125/1x11
CJA475-W-110/2x9
CJ22-W-70/1x9A
CJA237-W-70/1x6
CJA237-W-125/1x12.5
CJA475-W-110/2x11
CJ22-W-80/1x7
CJA237-W-70/1x7
CJA237-W-125/1x13
CJA475-W-125/2x9
CJ22-W-80/1x8.5
CJA237-W-70/1x7A
CJA237-W-125/2x9
CJA475-W-125/2x11
CJ22-W-90/1x9
CJA237-W-90/1x7
CJA237-W-125/2x13
CJA475-W-125/2x12.5
CJ22-W-90/1x9A
CJA237-W-90/1x9
CJA237-W-1405/1x9
CJA475-W-140/2x12.5
CJ22-W-90/1x11
CJA237-W-90/1x9A
CJA237-W-140/1x11
CJ22-W-110/1x9
CJA237-W-90/1x11
CJA237-W-140/1x12.5
For more information, please feel free to contact me .
here are some pictures of our products:
2) high performance
3) precisely design&good looking
4) low cavitation coefficient
Impulse turbine manufactured by our company are used in various hydraulic power plants with a water head of 100-800m and discharge of 0.07-2m3.
We have our own factory and experienced engineers who resopndible for designing and supervising. Many forien guests are visit our company every year.
product model:
CJ22-W-45/1x4
CJ22-W-110/1x9A
CJA237-W-90/1x11A
CJA237-W-140/1x13
CJ22-W-45/1x4.5
CJ22-W-110/1x11
CJA237-W-90/2x9
CJA237-W-140/2x9
CJ22-W-45/1x4.8
CJ22-W-110/1x12
CJA237-W-90/2x11
CJA237-W-140/2x13
CJ22-W-55/1x5.5
CJ22-W-110/1x12A
CJA237-W-1000/1x9
CJA237-W-160/1x9
CJ22-W-55/1x5.5A
CJ22-W-110/1x13
CJA237-W-100/1x9A
CJA237-W-160/1x11
CJ22-W-55/1x6
CJ22-W-110/1x14
CJA237-W-100/2x9
CJA237-W-160/1x12.5
CJ22-W-55/1x7
CJ22-W-110/1x15
CJA237-W-100/2x9A
CJA237-W-160/1x13
CJ22-W-60/1x5
CJ22-W-110/1x16
CJA237-W-110/1x9
CJA237-W-160/2x9
CJ22-W-60/1x6
CJ22-W-110/2x11
CJA237-W-110/1x11
CJA237-W-160/2x13
CJ22-W-60/1x7
CJ22-W-110/2x13
CJA237-W-110/2x9
CJA475-W-140/1x12.5
CJ22-W-60/1x7A
CJ22-W-125/1x8-18
CJA237-W-110/2x11
CJA475-W-90/2x7
CJ22-W-70/1x7.8
CJA237-W-70/1x4.5
CJA237-W-125/1x9
CJA475-W-100/2x7
CJ22-W-70/1x9
CJA237-W-70/1x5.5
CJA237-W-125/1x11
CJA475-W-110/2x9
CJ22-W-70/1x9A
CJA237-W-70/1x6
CJA237-W-125/1x12.5
CJA475-W-110/2x11
CJ22-W-80/1x7
CJA237-W-70/1x7
CJA237-W-125/1x13
CJA475-W-125/2x9
CJ22-W-80/1x8.5
CJA237-W-70/1x7A
CJA237-W-125/2x9
CJA475-W-125/2x11
CJ22-W-90/1x9
CJA237-W-90/1x7
CJA237-W-125/2x13
CJA475-W-125/2x12.5
CJ22-W-90/1x9A
CJA237-W-90/1x9
CJA237-W-1405/1x9
CJA475-W-140/2x12.5
CJ22-W-90/1x11
CJA237-W-90/1x9A
CJA237-W-140/1x11
CJ22-W-110/1x9
CJA237-W-90/1x11
CJA237-W-140/1x12.5
For more information, please feel free to contact me .
here are some pictures of our products:
alternating current diesel generator set
1.manufacturer--supply very competitive price
2.certified motor
3.joint venture technique
4.ISO9001
generator
Automatic circuit protection CE,ROSH,ULEPA,CARB,SONCAP,SAS
4-Stroke OHV engine
product
generators
Place of Origin
CHONGQING CHINA
Brand Name
ZHAOTIAN POWER
Model
ZTQ2500
Genset Type
Single-phase
AC Frequency (HZ)
50
AC Voltage (V)
220V
Cont.AC Output (KW)
1.0KW
Max.AC Output (KW)
1.2KW
Rated currenct(A)
9
Max.current(A)
10
Engine Model
ZTF
Power Factor (COS)
1.0
Bore*Stroke (mm)
70*54
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
210
Engine Speed (RPM)
3000
Starting System
Handle Recoil start/ Electric start
Max .Power Output (HP)
7.0HP
Fuel Tank Capacity (L)
8L
Cont. Operating (HRS)
10h
Operating Noise Level (dB)
68dB
Automatic circuit protection device
Y
Engine oil level warning alarm
Automatic Voltage Regulation
Y
others
1. Rubber shock absorber at the back of the motor, effective protection from transport damage
2.Gasoline type and volume clearly marked on the tank cup
3. Stable and long continue work capability
we can supply different price with different collocation
correlative product procedure
I : parts
complete
2.certified motor
3.joint venture technique
4.ISO9001
generator
Automatic circuit protection CE,ROSH,ULEPA,CARB,SONCAP,SAS
4-Stroke OHV engine
product
generators
Place of Origin
CHONGQING CHINA
Brand Name
ZHAOTIAN POWER
Model
ZTQ2500
Genset Type
Single-phase
AC Frequency (HZ)
50
AC Voltage (V)
220V
Cont.AC Output (KW)
1.0KW
Max.AC Output (KW)
1.2KW
Rated currenct(A)
9
Max.current(A)
10
Engine Model
ZTF
Power Factor (COS)
1.0
Bore*Stroke (mm)
70*54
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
210
Engine Speed (RPM)
3000
Starting System
Handle Recoil start/ Electric start
Max .Power Output (HP)
7.0HP
Fuel Tank Capacity (L)
8L
Cont. Operating (HRS)
10h
Operating Noise Level (dB)
68dB
Automatic circuit protection device
Y
Engine oil level warning alarm
Automatic Voltage Regulation
Y
others
1. Rubber shock absorber at the back of the motor, effective protection from transport damage
2.Gasoline type and volume clearly marked on the tank cup
3. Stable and long continue work capability
we can supply different price with different collocation
correlative product procedure
I : parts
complete
alternating current generator set
1.manufacturer--supply very competitive price
2.certified motor
3.joint venture technique
4.ISO9001
generator
Automatic circuit protection CE,ROSH,ULEPA,CARB,SONCAP,SAS
4-Stroke OHV engine
product
generators
Place of Origin
CHONGQING CHINA
Brand Name
ZHAOTIAN POWER
Model
ZTQ2500
Genset Type
Single-phase
AC Frequency (HZ)
50
AC Voltage (V)
220V
Cont.AC Output (KW)
1.0KW
Max.AC Output (KW)
1.2KW
Rated currenct(A)
9
Max.current(A)
10
Engine Model
ZTF
Power Factor (COS)
1.0
Bore*Stroke (mm)
70*54
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
210
Engine Speed (RPM)
3000
Starting System
Handle Recoil start/ Electric start
Max .Power Output (HP)
7.0HP
Fuel Tank Capacity (L)
8L
Cont. Operating (HRS)
10h
Operating Noise Level (dB)
68dB
Automatic circuit protection device
Y
Engine oil level warning alarm
Automatic Voltage Regulation
Y
others
1. Rubber shock absorber at the back of the motor, effective protection from transport damage
2.Gasoline type and volume clearly marked on the tank cup
3. Stable and long continue work capability
we can supply different price with different collocation
correlative product procedure
I : parts
complete
2.certified motor
3.joint venture technique
4.ISO9001
generator
Automatic circuit protection CE,ROSH,ULEPA,CARB,SONCAP,SAS
4-Stroke OHV engine
product
generators
Place of Origin
CHONGQING CHINA
Brand Name
ZHAOTIAN POWER
Model
ZTQ2500
Genset Type
Single-phase
AC Frequency (HZ)
50
AC Voltage (V)
220V
Cont.AC Output (KW)
1.0KW
Max.AC Output (KW)
1.2KW
Rated currenct(A)
9
Max.current(A)
10
Engine Model
ZTF
Power Factor (COS)
1.0
Bore*Stroke (mm)
70*54
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
210
Engine Speed (RPM)
3000
Starting System
Handle Recoil start/ Electric start
Max .Power Output (HP)
7.0HP
Fuel Tank Capacity (L)
8L
Cont. Operating (HRS)
10h
Operating Noise Level (dB)
68dB
Automatic circuit protection device
Y
Engine oil level warning alarm
Automatic Voltage Regulation
Y
others
1. Rubber shock absorber at the back of the motor, effective protection from transport damage
2.Gasoline type and volume clearly marked on the tank cup
3. Stable and long continue work capability
we can supply different price with different collocation
correlative product procedure
I : parts
complete
alternative energy 2kw excellent wind turbine
excellent wind turbine
1.Low speed permanent magnet generator
2.Over speed protection, low noise
3.16-18 years life span
alternative energy 2kw excellent wind turbine
Technical Parameter
Rated power
2,000W
Max power
2200W
Output voltage
96/220
Rated wind speed
8m/s
Rotor diameter
1.5m
Blade material
FRP
Swept area
5.85m
2
Cut-in wind speed
3m/s
Work wind speed
3-25m/s
Rotation speed
150r/min
Number of blades
5pcs
Tower height
8m
Tower type
Steel (Q235B)
Suggested battery type
12v200AH 8pcs
Service life
16-18 years
Product Description:
Our 2,000 watt vertical wind turbine can supply power for charging stations, water pumps, washing machines, TV, lighting, etc.
1.Low speed permanent magnet generator
2.Over speed protection, low noise
3.16-18 years life span
alternative energy 2kw excellent wind turbine
Technical Parameter
Rated power
2,000W
Max power
2200W
Output voltage
96/220
Rated wind speed
8m/s
Rotor diameter
1.5m
Blade material
FRP
Swept area
5.85m
2
Cut-in wind speed
3m/s
Work wind speed
3-25m/s
Rotation speed
150r/min
Number of blades
5pcs
Tower height
8m
Tower type
Steel (Q235B)
Suggested battery type
12v200AH 8pcs
Service life
16-18 years
Product Description:
Our 2,000 watt vertical wind turbine can supply power for charging stations, water pumps, washing machines, TV, lighting, etc.
alternative energy 2kw excellent wind turbine
excellent wind turbine
1.Low speed permanent magnet generator
2.Over speed protection, low noise
3.16-18 years life span
alternative energy 2kw excellent wind turbine
Technical Parameter
Rated power
2,000W
Max power
2200W
Output voltage
96/220
Rated wind speed
7-8m/s
Rotor diameter
2.4m
Blade material
FRP
Swept area
4.5m
2
Cut-in wind speed
2m/s
Work wind speed
2-24m/s
Rotation speed
150r/min
Number of blades
5pcs
Tower height
8m
Tower type
Steel (Q235B)
Suggested battery type
12v200AH 10pcs
Service life
16-18 years
Product Description:
Our 2,000 watt vertical wind turbine can supply power for charging stations, water pumps, washing machines, TV, lighting, etc.
1.Low speed permanent magnet generator
2.Over speed protection, low noise
3.16-18 years life span
alternative energy 2kw excellent wind turbine
Technical Parameter
Rated power
2,000W
Max power
2200W
Output voltage
96/220
Rated wind speed
7-8m/s
Rotor diameter
2.4m
Blade material
FRP
Swept area
4.5m
2
Cut-in wind speed
2m/s
Work wind speed
2-24m/s
Rotation speed
150r/min
Number of blades
5pcs
Tower height
8m
Tower type
Steel (Q235B)
Suggested battery type
12v200AH 10pcs
Service life
16-18 years
Product Description:
Our 2,000 watt vertical wind turbine can supply power for charging stations, water pumps, washing machines, TV, lighting, etc.
alternative energy wind driven generator for Poland
1.start up wind speed 2.5m/s
2.high output efficiency
3.good after sale service
4.CE approve, water proof
The Introduction of Wind Turbine System:
Qingdao Yangfan Wind Power Equipment Co., Ltd
adopts advanced technology equipment and manufactures all kinds of off-grid small wind turbine generator:
YF2.2-300W, YF2.8-600W, YF3.2-1000W, YF4.0-2000W, YF5.0-3000W, YF6.0-5000W, YF8.0-10KW, wind-solar complementary street light, wind-solar hybrid generation systems, solar panels, controller and inverter.
The generator we used is high-quality permanent magnet synchronous generator and can serve for a long time. The system of Yaw+electromagnetic can control the generator speed at a rated rotating speed. The wind turbine has a stable output power and safe running. Wind rotor never goes to over speed even encounter to variable wind or strong gale.
Characteristics:
1.Start up at a low wind speed.
2.Speed control method: Yaw+electromagnetic can control the generator speed at a rated rotating speed. Wind rotor never goes to over speed even encounter to variable wind or strong gale. Low start up wind speed 2.5m/s, 3-25m/s wind speed, wind turbine can run smoothly.
3.Permanent magnet synchronous generator, low start-up resistance moment.
4.Safety control: manual stop mechanism
5.Streamline design, sealed slip ring
6.Constant-voltage charging
7.No cable twist
8.No corrosion
Wind wheel diameter(m)
8.0
Survived wind speed(m/s)
40
Material and number of blade
reinforced fiber glass/3
Rated voltage(V)
DC360V
Sweep wind area(m
2
)
12.6
Stop method
manual
Rated power/Max power(W)
2000/3500
Generator type
permanent magnet synchronous generator
Rated rotate speed
(r/min)
160
Battery voltage(V)/capacity(Ah)
12V100AH 8 pieces or 12V200AH 4 pieces
Rated wind speed
(m/s)
10
Speed control method
Yaw+electromagnetic
Start up wind speed
(m/s)
2.5
tower height(m)
12
Working wind speed(m/s)
3-25
Top weight(kg)
600
2.high output efficiency
3.good after sale service
4.CE approve, water proof
The Introduction of Wind Turbine System:
Qingdao Yangfan Wind Power Equipment Co., Ltd
adopts advanced technology equipment and manufactures all kinds of off-grid small wind turbine generator:
YF2.2-300W, YF2.8-600W, YF3.2-1000W, YF4.0-2000W, YF5.0-3000W, YF6.0-5000W, YF8.0-10KW, wind-solar complementary street light, wind-solar hybrid generation systems, solar panels, controller and inverter.
The generator we used is high-quality permanent magnet synchronous generator and can serve for a long time. The system of Yaw+electromagnetic can control the generator speed at a rated rotating speed. The wind turbine has a stable output power and safe running. Wind rotor never goes to over speed even encounter to variable wind or strong gale.
Characteristics:
1.Start up at a low wind speed.
2.Speed control method: Yaw+electromagnetic can control the generator speed at a rated rotating speed. Wind rotor never goes to over speed even encounter to variable wind or strong gale. Low start up wind speed 2.5m/s, 3-25m/s wind speed, wind turbine can run smoothly.
3.Permanent magnet synchronous generator, low start-up resistance moment.
4.Safety control: manual stop mechanism
5.Streamline design, sealed slip ring
6.Constant-voltage charging
7.No cable twist
8.No corrosion
Wind wheel diameter(m)
8.0
Survived wind speed(m/s)
40
Material and number of blade
reinforced fiber glass/3
Rated voltage(V)
DC360V
Sweep wind area(m
2
)
12.6
Stop method
manual
Rated power/Max power(W)
2000/3500
Generator type
permanent magnet synchronous generator
Rated rotate speed
(r/min)
160
Battery voltage(V)/capacity(Ah)
12V100AH 8 pieces or 12V200AH 4 pieces
Rated wind speed
(m/s)
10
Speed control method
Yaw+electromagnetic
Start up wind speed
(m/s)
2.5
tower height(m)
12
Working wind speed(m/s)
3-25
Top weight(kg)
600
1KW/400W wind-solar power supply system
1KW/400W wind-solar power supply system
1.Can work in rainy and windy day
2.Long lifespan, long service time
3.Eco-friendly
1KW/400W wind-solar power supply system
Features
1)Vogue design for outer and simple style.
2)Stand-alone system for generating power.
3)Powerful performance for anti-wind and High intensity structure.
4)Overlong lifespan of 25 years for solar panel and 20 years for wind turbine
Update Date:2011-10-25 19:20:36
1.Can work in rainy and windy day
2.Long lifespan, long service time
3.Eco-friendly
1KW/400W wind-solar power supply system
Features
1)Vogue design for outer and simple style.
2)Stand-alone system for generating power.
3)Powerful performance for anti-wind and High intensity structure.
4)Overlong lifespan of 25 years for solar panel and 20 years for wind turbine
Update Date:2011-10-25 19:20:36
alternative energy wind driven generator
1.start up wind speed 2.5m/s
2.high quality
3.high output efficiency
4.good after sale service
5.CE approve, water proof
The Introduction of Wind Turbine System:
Qingdao Yangfan Wind Power Equipment Co., Ltd
adopts advanced technology equipment and manufactures all kinds of off-grid small wind turbine generator:
YF2.2-300W, YF2.8-600W, YF3.2-1000W, YF4.0-2000W, YF5.0-3000W, YF6.0-5000W, YF8.0-10KW, wind-solar complementary street light, wind-solar hybrid generation systems, solar panels, controller and inverter.
The generator we used is high-quality permanent magnet synchronous generator and can serve for a long time. The system of Yaw+electromagnetic can control the generator speed at a rated rotating speed. The wind turbine has a stable output power and safe running. Wind rotor never goes to over speed even encounter to variable wind or strong gale.
Characteristics:
1.Start up at a low wind speed.
2.Speed control method: Yaw+electromagnetic can control the generator speed at a rated rotating speed. Wind rotor never goes to over speed even encounter to variable wind or strong gale. Low start up wind speed 2.5m/s, 3-25m/s wind speed, wind turbine can run smoothly.
3.Permanent magnet synchronous generator, low start-up resistance moment.
4.Safety control: manual stop mechanism
5.Streamline design, sealed slip ring
6.Constant-voltage charging
7.No cable twist
8.No corrosion
Wind wheel diameter(m)
8.0
Survived wind speed(m/s)
40
Material and number of blade
reinforced fiber glass/3
Rated voltage(V)
DC360V
Sweep wind area(m
2
)
12.6
Stop method
manual
Rated power/Max power(W)
2000/3500
Generator type
permanent magnet synchronous generator
Rated rotate speed
(r/min)
160
Battery voltage(V)/capacity(Ah)
12V100AH 8 pieces or 12V200AH 4 pieces
Rated wind speed
(m/s)
10
Speed control method
Yaw+electromagnetic
Start up wind speed
(m/s)
2.5
tower height(m)
12
Working wind speed(m/s)
3-25
Top weight(kg)
600
2.high quality
3.high output efficiency
4.good after sale service
5.CE approve, water proof
The Introduction of Wind Turbine System:
Qingdao Yangfan Wind Power Equipment Co., Ltd
adopts advanced technology equipment and manufactures all kinds of off-grid small wind turbine generator:
YF2.2-300W, YF2.8-600W, YF3.2-1000W, YF4.0-2000W, YF5.0-3000W, YF6.0-5000W, YF8.0-10KW, wind-solar complementary street light, wind-solar hybrid generation systems, solar panels, controller and inverter.
The generator we used is high-quality permanent magnet synchronous generator and can serve for a long time. The system of Yaw+electromagnetic can control the generator speed at a rated rotating speed. The wind turbine has a stable output power and safe running. Wind rotor never goes to over speed even encounter to variable wind or strong gale.
Characteristics:
1.Start up at a low wind speed.
2.Speed control method: Yaw+electromagnetic can control the generator speed at a rated rotating speed. Wind rotor never goes to over speed even encounter to variable wind or strong gale. Low start up wind speed 2.5m/s, 3-25m/s wind speed, wind turbine can run smoothly.
3.Permanent magnet synchronous generator, low start-up resistance moment.
4.Safety control: manual stop mechanism
5.Streamline design, sealed slip ring
6.Constant-voltage charging
7.No cable twist
8.No corrosion
Wind wheel diameter(m)
8.0
Survived wind speed(m/s)
40
Material and number of blade
reinforced fiber glass/3
Rated voltage(V)
DC360V
Sweep wind area(m
2
)
12.6
Stop method
manual
Rated power/Max power(W)
2000/3500
Generator type
permanent magnet synchronous generator
Rated rotate speed
(r/min)
160
Battery voltage(V)/capacity(Ah)
12V100AH 8 pieces or 12V200AH 4 pieces
Rated wind speed
(m/s)
10
Speed control method
Yaw+electromagnetic
Start up wind speed
(m/s)
2.5
tower height(m)
12
Working wind speed(m/s)
3-25
Top weight(kg)
600
aluminium extrusion drawing
Product name: Aluminium Extrusion Drawing
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
Product name: Aluminium Extrusion Drawing
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
1.
We are
professional in designing and manufacturing
aluminum products.
2.
All the drawings above are base on our own mould, you
don't need to pay for moulding making
.
3.
We have our own extrusion,moulding,CNC maching department,and designing department.
4.
We can
design according to your mind
, and we are good at the processe and quanlity controling.
5.
Foshan Nanhai Yixin Aluminium Products Co.,Ltd is the one of professional manufacturer for aluminium products in China. We are located in Nanhai, Foshan City, Guangdong Province,China,covering an area of 10,000 square meters.
6.
We are professional for aluminium extrusion mould,aluminium extruions(eg:aluminium profiles,aluminium heatsink),aluminium fabrication,anodizing,powder coatting and so on.
7.
Please feel free to contact us for more information. We sincerely welcome you to visit our factory and discuss business.
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
Product name: Aluminium Extrusion Drawing
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
1.
We are
professional in designing and manufacturing
aluminum products.
2.
All the drawings above are base on our own mould, you
don't need to pay for moulding making
.
3.
We have our own extrusion,moulding,CNC maching department,and designing department.
4.
We can
design according to your mind
, and we are good at the processe and quanlity controling.
5.
Foshan Nanhai Yixin Aluminium Products Co.,Ltd is the one of professional manufacturer for aluminium products in China. We are located in Nanhai, Foshan City, Guangdong Province,China,covering an area of 10,000 square meters.
6.
We are professional for aluminium extrusion mould,aluminium extruions(eg:aluminium profiles,aluminium heatsink),aluminium fabrication,anodizing,powder coatting and so on.
7.
Please feel free to contact us for more information. We sincerely welcome you to visit our factory and discuss business.
aluminum extrusion drawings
Product name: Aluminum Extrusion Drawing
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
1.
We are
professional in designing and manufacturing
aluminum products.
2.
All the drawings above are base on our own mould, you
don't need to pay for moulding making
.
3.
We have our own extrusion,moulding,CNC maching department,and designing department.
4.
We can
design according to your mind
, and we are good at the processe and quanlity controling.
5.
Foshan Nanhai Yixin Aluminium Products Co.,Ltd is the one of professional manufacturer for aluminium products in China. We are located in Nanhai, Foshan City, Guangdong Province,China,covering an area of 10,000 square meters.
6.
We are professional for aluminium extrusion mould,aluminium extruions(eg:aluminium profiles,aluminium heatsink),aluminium fabrication,anodizing,powder coatting and so on.
7.
Please feel free to contact us for more information. We sincerely welcome you to visit our factory and discuss business.
Alloy: 6063
Finish: Mill,Anodizing,Powder coatting,or can do by customer's request
1.
We are
professional in designing and manufacturing
aluminum products.
2.
All the drawings above are base on our own mould, you
don't need to pay for moulding making
.
3.
We have our own extrusion,moulding,CNC maching department,and designing department.
4.
We can
design according to your mind
, and we are good at the processe and quanlity controling.
5.
Foshan Nanhai Yixin Aluminium Products Co.,Ltd is the one of professional manufacturer for aluminium products in China. We are located in Nanhai, Foshan City, Guangdong Province,China,covering an area of 10,000 square meters.
6.
We are professional for aluminium extrusion mould,aluminium extruions(eg:aluminium profiles,aluminium heatsink),aluminium fabrication,anodizing,powder coatting and so on.
7.
Please feel free to contact us for more information. We sincerely welcome you to visit our factory and discuss business.
armor rods
armor rods,cable armor clamp,overhead line fitting
Aluminum alloy
ISO 9001:2000
install easily
professional manufacturer
armor rods,cable armor clamp,overhead line fitting
1.Usage:wrap the conductor,improve the stiffness of conductor and protect the conductor,also resist -vibration. 2.Structure: a.this structure increase self-damping,make the abrasion low. b.aluminum alloy material,it has good mechanical function and resist-corrsion.
c. install easily and check easily.It doesn't need professional tools,one person can finish it.
Order Notice:
Usage condition: 1.the damaged dimension between 7%-25%
Aluminum alloy
ISO 9001:2000
install easily
professional manufacturer
armor rods,cable armor clamp,overhead line fitting
1.Usage:wrap the conductor,improve the stiffness of conductor and protect the conductor,also resist -vibration. 2.Structure: a.this structure increase self-damping,make the abrasion low. b.aluminum alloy material,it has good mechanical function and resist-corrsion.
c. install easily and check easily.It doesn't need professional tools,one person can finish it.
Order Notice:
Usage condition: 1.the damaged dimension between 7%-25%
asynchronous hydro generator
It has advantages such as strong anti-runaway, compact in structure, low cost.
Asynchronous hydro generator is a new kind of generator developed by our company.Yi Mount SHP in Korea is of such a generator type. It is a turn-key project excuted by our company in May 2010. It works well till now.
Asynchronous hydro generator is a new kind of generator developed by our company.Yi Mount SHP in Korea is of such a generator type. It is a turn-key project excuted by our company in May 2010. It works well till now.
asynchronous hydro turbine
water turbine, hydro generator, hydro turbine
Characteristics of Propeller type unit:
The axial flow turbines are available for hydraulic power resources of medium and lowe heads.
Shaoyang Hengyuan manufactures both the Propeller type (fixed blad tyoe) and the Kaplan/Axial-flow type (Movable blade type) turbines.
The propeller type turbines are suitable for hydropower stations with small and medium capacities and heads, and relatively stable loads.
The Kaplan turbines are suitable for hydropower stations with medium or large capacities and heads, and relatively unstable loads.
Water turbine/Hydro turbine
1. Single unit capacity: 50kW-30000kW
2. Multi types: Kaplan/Axial-flow turbine, Propeller turbine, Francis turbine, Pelton turbine Tubular turbine and Turgo turbine
3. Envionment friendly
4. Long life: 30-50 years
The most suitable choice
Shaoyang Hengyuan makes the most appropriate choice of renewable energy source and the system to be used.
The most profitable investment
Shaoyang Hengyuan offers you the most suitable and profitable energy investment by analysing your energy needs.
Efficient High Level Technology
Shaoyang Hengyuan supplies and installs the most efficient equipment for energy production with the latest technology.
Service and Spare parts
Shaoyang Hengyuan provides the highest quality spare parts and after sales services for system continuation and maintenance after installation.
The company fully carry out ISO9001:2008 management system, all the procedures are strictly monitored under the relevant quality control statement, including equipments’ design, producing, testing, packaging, transportation and after-sale servive.
Characteristics of Propeller type unit:
The axial flow turbines are available for hydraulic power resources of medium and lowe heads.
Shaoyang Hengyuan manufactures both the Propeller type (fixed blad tyoe) and the Kaplan/Axial-flow type (Movable blade type) turbines.
The propeller type turbines are suitable for hydropower stations with small and medium capacities and heads, and relatively stable loads.
The Kaplan turbines are suitable for hydropower stations with medium or large capacities and heads, and relatively unstable loads.
Water turbine/Hydro turbine
1. Single unit capacity: 50kW-30000kW
2. Multi types: Kaplan/Axial-flow turbine, Propeller turbine, Francis turbine, Pelton turbine Tubular turbine and Turgo turbine
3. Envionment friendly
4. Long life: 30-50 years
The most suitable choice
Shaoyang Hengyuan makes the most appropriate choice of renewable energy source and the system to be used.
The most profitable investment
Shaoyang Hengyuan offers you the most suitable and profitable energy investment by analysing your energy needs.
Efficient High Level Technology
Shaoyang Hengyuan supplies and installs the most efficient equipment for energy production with the latest technology.
Service and Spare parts
Shaoyang Hengyuan provides the highest quality spare parts and after sales services for system continuation and maintenance after installation.
The company fully carry out ISO9001:2008 management system, all the procedures are strictly monitored under the relevant quality control statement, including equipments’ design, producing, testing, packaging, transportation and after-sale servive.
asynchronous hydro turbine
water turbine, hydro generator, hydro turbine
Characteristics of Propeller type unit:
The axial flow turbines are available for hydraulic power resources of medium and lowe heads.
Shaoyang Hengyuan manufactures both the Propeller type (fixed blad tyoe) and the Kaplan/Axial-flow type (Movable blade type) turbines.
The propeller type turbines are suitable for hydropower stations with small and medium capacities and heads, and relatively stable loads.
The Kaplan turbines are suitable for hydropower stations with medium or large capacities and heads, and relatively unstable loads.
Water turbine/Hydro turbine
1. Single unit capacity: 50kW-30000kW
2. Multi types: Kaplan/Axial-flow turbine, Propeller turbine, Francis turbine, Pelton turbine Tubular turbine and Turgo turbine
3. Envionment friendly
4. Long life: 30-50 years
The most suitable choice
Shaoyang Hengyuan makes the most appropriate choice of renewable energy source and the system to be used.
The most profitable investment
Shaoyang Hengyuan offers you the most suitable and profitable energy investment by analysing your energy needs.
Efficient High Level Technology
Shaoyang Hengyuan supplies and installs the most efficient equipment for energy production with the latest technology.
Service and Spare parts
Shaoyang Hengyuan provides the highest quality spare parts and after sales services for system continuation and maintenance after installation.
The company fully carry out ISO9001:2008 management system, all the procedures are strictly monitored under the relevant quality control statement, including equipments’ design, producing, testing, packaging, transportation and after-sale servive.
Characteristics of Propeller type unit:
The axial flow turbines are available for hydraulic power resources of medium and lowe heads.
Shaoyang Hengyuan manufactures both the Propeller type (fixed blad tyoe) and the Kaplan/Axial-flow type (Movable blade type) turbines.
The propeller type turbines are suitable for hydropower stations with small and medium capacities and heads, and relatively stable loads.
The Kaplan turbines are suitable for hydropower stations with medium or large capacities and heads, and relatively unstable loads.
Water turbine/Hydro turbine
1. Single unit capacity: 50kW-30000kW
2. Multi types: Kaplan/Axial-flow turbine, Propeller turbine, Francis turbine, Pelton turbine Tubular turbine and Turgo turbine
3. Envionment friendly
4. Long life: 30-50 years
The most suitable choice
Shaoyang Hengyuan makes the most appropriate choice of renewable energy source and the system to be used.
The most profitable investment
Shaoyang Hengyuan offers you the most suitable and profitable energy investment by analysing your energy needs.
Efficient High Level Technology
Shaoyang Hengyuan supplies and installs the most efficient equipment for energy production with the latest technology.
Service and Spare parts
Shaoyang Hengyuan provides the highest quality spare parts and after sales services for system continuation and maintenance after installation.
The company fully carry out ISO9001:2008 management system, all the procedures are strictly monitored under the relevant quality control statement, including equipments’ design, producing, testing, packaging, transportation and after-sale servive.
aupply hydro turbine generator
1)easy installation & operation
2)high performance
3)corrosion resisting
4)strictly according to the quality control system
Sichuan Emeishan Chicheng Machinry Co., LTD is specialize in manufacturing water turbine, generator and governor. The Products spread all over the country in each province and autonomous region, export to more than ten countries such as U.S.A., Iran, Vietnam, Indonesia, etc.
Our generator is suitable for hydropower station of middle or high water head and medium-sized flow. Because the structure of the Turbine-Generator is simple , and it is reliable to run,. suitable for various water head and include many types of runners, they can be widely used.
Any problem, please feel free to contact me.
Product pictures
2)high performance
3)corrosion resisting
4)strictly according to the quality control system
Sichuan Emeishan Chicheng Machinry Co., LTD is specialize in manufacturing water turbine, generator and governor. The Products spread all over the country in each province and autonomous region, export to more than ten countries such as U.S.A., Iran, Vietnam, Indonesia, etc.
Our generator is suitable for hydropower station of middle or high water head and medium-sized flow. Because the structure of the Turbine-Generator is simple , and it is reliable to run,. suitable for various water head and include many types of runners, they can be widely used.
Any problem, please feel free to contact me.
Product pictures
auto i-shape straw packing and dividing and cold-cutting machine
1.auto i-shape straw packing and dividing and cold-cutting machine;
2.Automatic counting and batch alarm.
auto i-shape straw packing and dividing and cold-cutting machine is an equipment for packing straw into bag auto matically and cutting single-straw piece by piece. It is highly automatic to make sure multiple-stage running successively, and to complete filling in and packing at one time. The machine boasts easy operation and reliable quality. It is mainly used as the auxiliary equipment for sterile packed drinks such as tetra brik and the pack of single cold-cut straw which is for export. The heat sealing is second heat. The main heat seal part includes 2 heat rollers, dura ble in use. Sub-heat is made of 4 great wheels, which can seal the edge.Its structure is learnt from Italian technology. For differ rent lenghts of tube, you need only to adjust the heat sealing device instead of replacing the mold.
Driving motor
0.75kw controlled by frequency converter
Production capacity
600~700pcs/h (Straight straws)
350~450pcs/min (Flexible straws)
Packing method
Specifications of srtaw
Four sides sealing
4,5,10,20pcs/piece
Wrapping material
Materials that can be hot sealed such as BOPP
Thickness of film
20-30μ
Roll diameter
maximum 340mm
Inside diameter of roll
75mm
Width of film
maximum280mm
Packing shape
15mm(p× 96~250mm(w
Other specifications are Customizable
Normal
Straw diameter
Ø 2.5~ Ø7mm
Straw wall thickness
0.15~0.25mm
Length
90~255mm(Normal)
Other specifications are Customizable.
Machine size (L×W×H)
2000× 900 × 1600mm
Machine weight
400kg
2.Automatic counting and batch alarm.
auto i-shape straw packing and dividing and cold-cutting machine is an equipment for packing straw into bag auto matically and cutting single-straw piece by piece. It is highly automatic to make sure multiple-stage running successively, and to complete filling in and packing at one time. The machine boasts easy operation and reliable quality. It is mainly used as the auxiliary equipment for sterile packed drinks such as tetra brik and the pack of single cold-cut straw which is for export. The heat sealing is second heat. The main heat seal part includes 2 heat rollers, dura ble in use. Sub-heat is made of 4 great wheels, which can seal the edge.Its structure is learnt from Italian technology. For differ rent lenghts of tube, you need only to adjust the heat sealing device instead of replacing the mold.
Driving motor
0.75kw controlled by frequency converter
Production capacity
600~700pcs/h (Straight straws)
350~450pcs/min (Flexible straws)
Packing method
Specifications of srtaw
Four sides sealing
4,5,10,20pcs/piece
Wrapping material
Materials that can be hot sealed such as BOPP
Thickness of film
20-30μ
Roll diameter
maximum 340mm
Inside diameter of roll
75mm
Width of film
maximum280mm
Packing shape
15mm(p× 96~250mm(w
Other specifications are Customizable
Normal
Straw diameter
Ø 2.5~ Ø7mm
Straw wall thickness
0.15~0.25mm
Length
90~255mm(Normal)
Other specifications are Customizable.
Machine size (L×W×H)
2000× 900 × 1600mm
Machine weight
400kg
axial flow turbine/turbine water/micro turbine for hydraulic projects
1) proficient making process and experience
2) technology advancing
3) high power, low consumption
4) corrosion resisting
Sichuan Emeishan Chicheng machinery Co., ltd is located in emeishan city, which is the world natural and culture heritage. Our company engaged in making water turbine since 1980s.
Our products include four types of water turbines, governors,generators and so on. They are popular in many provinces and autonomous regions of china and export to all over the world. Our country attracts many foreign people to visit our factory.
Kaplan turbine used for large & medium hydraulic power plants with a water head of 3m~20m and medium &small axial flow turbine used for hydraulic power plants with a water head of 30m~40m,driving the rotation of water turbine generator for power generation.
available product model:
ZD760-LMY(LH)-60, 80,100,120,140,160,180,200,250
ZD560-LMY(LH)-60, 80,100,120,140,160,180,200,225,250
ZDT03-LMY(LH)-60, 80,100,120,140,160,180,200,225,250
ZDJP502-LMY(LH)-60, 80,100,120,140,160,180,200,220,240
ZD560-LH-60, 80,100,120,140,160,180,200,250
ZD760-LH-60, 80,100,120,140,160,180,200,225,225,250
product pictures:
2) technology advancing
3) high power, low consumption
4) corrosion resisting
Sichuan Emeishan Chicheng machinery Co., ltd is located in emeishan city, which is the world natural and culture heritage. Our company engaged in making water turbine since 1980s.
Our products include four types of water turbines, governors,generators and so on. They are popular in many provinces and autonomous regions of china and export to all over the world. Our country attracts many foreign people to visit our factory.
Kaplan turbine used for large & medium hydraulic power plants with a water head of 3m~20m and medium &small axial flow turbine used for hydraulic power plants with a water head of 30m~40m,driving the rotation of water turbine generator for power generation.
available product model:
ZD760-LMY(LH)-60, 80,100,120,140,160,180,200,250
ZD560-LMY(LH)-60, 80,100,120,140,160,180,200,225,250
ZDT03-LMY(LH)-60, 80,100,120,140,160,180,200,225,250
ZDJP502-LMY(LH)-60, 80,100,120,140,160,180,200,220,240
ZD560-LH-60, 80,100,120,140,160,180,200,250
ZD760-LH-60, 80,100,120,140,160,180,200,225,225,250
product pictures:
1KW-Vertical Axis Wind Turbine
Vertical Axis Wind Turbine,no noise, no vibration ,low start wind speed,high wind utilization
Parameters
Rated power(W)
1,000
The max power(W)
1500
Rated voltage(V)
48/24
Generator style
3-phase AC PM
Protection grade of generator
IP54
Material of the blades
Fiberglass-Reinforced Plastics
Rotor diameter(m)
2.2
Blades length(mm)
1830
Blades width (mm)
410
Start up wind speed(m/s)
2.5
Rated wind speed(m/s)
10-11
Working wind speed(m/s)
3-25
Survival wind speed(m/s)
40
Rotation speed(rpm)(r/min)
50
Number of blades
5
Tower height (m)
8
Controller and inverter
Advanced wind& solar hybrid controller and pure sine wave inverter
Recommended battery type
12V100AH*4pcs
Parameters
Rated power(W)
1,000
The max power(W)
1500
Rated voltage(V)
48/24
Generator style
3-phase AC PM
Protection grade of generator
IP54
Material of the blades
Fiberglass-Reinforced Plastics
Rotor diameter(m)
2.2
Blades length(mm)
1830
Blades width (mm)
410
Start up wind speed(m/s)
2.5
Rated wind speed(m/s)
10-11
Working wind speed(m/s)
3-25
Survival wind speed(m/s)
40
Rotation speed(rpm)(r/min)
50
Number of blades
5
Tower height (m)
8
Controller and inverter
Advanced wind& solar hybrid controller and pure sine wave inverter
Recommended battery type
12V100AH*4pcs
axial flow type speed governor with competitive price
1) micorcomputer governor
2) Precisely designed & good looking
3) easy intallation
4) simplicity of installation & operation
The governor produced by our company is situable for axial flow water turbine, francis water turbine, inclined jet turbine and pelton water turbine.
The CJT series impact type hydraulic turbine microcomputer velometer, besides has the normal regulated flow to spurt the needle, but also has may the quick disconnect current capacity booklet director, has overcome traditional ordinary velometer's many flaws. In recent years, we utilized advanced programmable and the modern hydraulic control technology, developed successfully the new impact type hydraulic turbine velometer, not only technological advance, and the organization simplified, improved the adjustment quality and the complete machine reliability greatly. Is suitable attacks hydraulic engine's regulating control in the single spray nozzle and the multi-spray nozzles.
Please feel free to contace me for more information.
2) Precisely designed & good looking
3) easy intallation
4) simplicity of installation & operation
The governor produced by our company is situable for axial flow water turbine, francis water turbine, inclined jet turbine and pelton water turbine.
The CJT series impact type hydraulic turbine microcomputer velometer, besides has the normal regulated flow to spurt the needle, but also has may the quick disconnect current capacity booklet director, has overcome traditional ordinary velometer's many flaws. In recent years, we utilized advanced programmable and the modern hydraulic control technology, developed successfully the new impact type hydraulic turbine velometer, not only technological advance, and the organization simplified, improved the adjustment quality and the complete machine reliability greatly. Is suitable attacks hydraulic engine's regulating control in the single spray nozzle and the multi-spray nozzles.
Please feel free to contace me for more information.
battery charged wind turbine 5kw
battery charged wind turbine 5kw
1.low start up wind speed 2.5m/s.
2. higher generating efficiency above 0.8
3.SKF bearing
battery charged wind turbine 5kw
1. inverter adopting MPPT and IGBT technologies, with high power generating capacity, wide AC voltage range.
2. Siemens PLC controller receiving wind signal and operation signal, quick response and reaction and intelligent control.
3. rectifer, dumping load, inverter equipped seperately, with inverter adopting MPPT and IGBT technologies, high power generating capacity, wide AC voltage range.
4.yaw shaft with power supply and gearbox included inside, controlling the operation of wind generator.
5. dogvane and anemometer indicating wind direction and measuring wind speed, transmitting wind signal to PLC controller.
6. guys tower, free standing tower, hydraulic tower etc.
1.low start up wind speed 2.5m/s.
2. higher generating efficiency above 0.8
3.SKF bearing
battery charged wind turbine 5kw
1. inverter adopting MPPT and IGBT technologies, with high power generating capacity, wide AC voltage range.
2. Siemens PLC controller receiving wind signal and operation signal, quick response and reaction and intelligent control.
3. rectifer, dumping load, inverter equipped seperately, with inverter adopting MPPT and IGBT technologies, high power generating capacity, wide AC voltage range.
4.yaw shaft with power supply and gearbox included inside, controlling the operation of wind generator.
5. dogvane and anemometer indicating wind direction and measuring wind speed, transmitting wind signal to PLC controller.
6. guys tower, free standing tower, hydraulic tower etc.
beautiful design/vertical axis wind turbine 50W butterfly for street light/suburban power-supply system
The noise and starting wind speed is low when works,which is specislly suitable for small area lighting
Product Specification and Quotation for Wind butterfly
Wind generator part
Model
CH-50
CH-150
CH-250
Name
Wind butterfly
Wind butterfly
Wind butterfly
Rated power
50W
150W
250w
Rated DC voltage
DC 12V
DC 12V
DC 12V/24V
Rated current
4.1A
12.5A
20A/10A
Rated speed
220r/m
178r/m
165r/m
Max power
65W
200W
300W
Number of blade
2 pcs
2 pcs
2 pcs
Starting wind speed
2m/s
2m/s
2 m/s
Cut-in wind speed
2.5m/s
2.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
18m/s
Security wind speed
36m/s
35m/s
35m/s
Rated wind speed
13m/s
13m/s
13m/s
Engine
Three-phase permanent magnel generator
Three-phase permanent magnel generator
Three-phase permanent magnel generator
Rotor diameter
450mm
600mm
900mm
Blade material
Carbon fiber reinforced plastics
Carbon fiber reinforced plastics
Blade material
Output line anti-winding device
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
Over-speed wind protection
Electromagnetic brake
Electromagnetic brake
Electromagnetic brake
Life span
15 years
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-40°C-70°C
-40°C-70°C
-40°C-70°C
N.W.
27kg
32kg
37kg
Packing material
Carton box and foam material
Wooden case and foam material
Wooden case and foam material
packing dimension
1650*625*620mm
2340*860*760mm
2140*1040*1040mm
G.W.
55kg
85kg
100kg
Price
(
USD
)
570
720
800
Tower part
Tower height
6m
6m
6m
Packing material
Wooden case and foam material
Wooden case and foam material
Wooden case and foam material
G.W.
100kg
100kg
100kg
Price
(
USD
)
350
350
350
the controlling circuit equipment
Controller
100W
300W
300W
Inverter
100W
300W
300W
G.W.
2.5kg
2.5kg
2.5kg
PRICE (USD)
120
120
160
Solar panel
Model
(single crystal silicon)
100W
100W
100W
N.W.
10.5kg
10.5kg
10.5kg
PRICE(USD)
280
280
280
Total price (USD)
Product Specification and Quotation for Wind butterfly
Wind generator part
Model
CH-50
CH-150
CH-250
Name
Wind butterfly
Wind butterfly
Wind butterfly
Rated power
50W
150W
250w
Rated DC voltage
DC 12V
DC 12V
DC 12V/24V
Rated current
4.1A
12.5A
20A/10A
Rated speed
220r/m
178r/m
165r/m
Max power
65W
200W
300W
Number of blade
2 pcs
2 pcs
2 pcs
Starting wind speed
2m/s
2m/s
2 m/s
Cut-in wind speed
2.5m/s
2.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
18m/s
Security wind speed
36m/s
35m/s
35m/s
Rated wind speed
13m/s
13m/s
13m/s
Engine
Three-phase permanent magnel generator
Three-phase permanent magnel generator
Three-phase permanent magnel generator
Rotor diameter
450mm
600mm
900mm
Blade material
Carbon fiber reinforced plastics
Carbon fiber reinforced plastics
Blade material
Output line anti-winding device
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
Over-speed wind protection
Electromagnetic brake
Electromagnetic brake
Electromagnetic brake
Life span
15 years
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-40°C-70°C
-40°C-70°C
-40°C-70°C
N.W.
27kg
32kg
37kg
Packing material
Carton box and foam material
Wooden case and foam material
Wooden case and foam material
packing dimension
1650*625*620mm
2340*860*760mm
2140*1040*1040mm
G.W.
55kg
85kg
100kg
Price
(
USD
)
570
720
800
Tower part
Tower height
6m
6m
6m
Packing material
Wooden case and foam material
Wooden case and foam material
Wooden case and foam material
G.W.
100kg
100kg
100kg
Price
(
USD
)
350
350
350
the controlling circuit equipment
Controller
100W
300W
300W
Inverter
100W
300W
300W
G.W.
2.5kg
2.5kg
2.5kg
PRICE (USD)
120
120
160
Solar panel
Model
(single crystal silicon)
100W
100W
100W
N.W.
10.5kg
10.5kg
10.5kg
PRICE(USD)
280
280
280
Total price (USD)
beautiful designed LED street light
this kind vawt , we have technology patent , start wind speed is 1m/s , maglev wind turbine generate 3 phases alternate current
Dear Mr or Mirs :
I hope your everthing goes well . i am lisa , our company produce maglev wind turbine , and selling wind solar hybrid street light !
we have many experiences of installing wind solar hybrid street light .
and we have been sold out many wind turbines for street light . so if you have a wind solar hybrid street light project , please contact with me !I promise you high quality and cheap price .
Thank you for your time .
Best regards !
lisa
specification :
Rated Power:400W
Wind wheel diameter:1.20M/1.06M
Weight:25KG
Blade Material:Aluminum Alloy
The number of blade:3
Minimum wind speed start:1m/s
Minimum power wind speed:1m/s
Minimum charge wind speed:2.5m/s
Rated wind speed:8m/s
Maximum cut off wind speed:15m/s
Resistant to wind speed limit:65m/s
The type of Generator:
Three-phase AC maglev wind turbine
Controllor output voltage:12V
Controllor output current:lower than 20Amp
Controllor brake system: Over speed automatic Three-phase short-circuit braking
Normal operating temperature:-30~50 °C
Item
Horizontal axis (HAWT)
Vertical axis (EML)
Start wind speed
High(3m/s)
Low(1m/s)
Wind conditions required
Require stable wind direction
Any wind direction
Encountered turbulence
Reduce the efficiency
Efficiency is not affected
Power stability
Change by wind direction
Without any wind effect
Noise
Large(45 decibels or more)
Low noisy(because there is no
mechanical friction)
Product shape
Normal
Beautiful
Installation height
High(need to avoid the terrain
turbulence)
Low(not afraid of turbulence)
Installation location
Just in open area like suburb
Any location
Generator material
Plastic or composite
metal
Structure strength
Poor (easy to broken)
High(high strengthen )
Resistance of wind speed
Poor(about 40 m/s)
High(about 65 m/s)
Safety in utilization
poor
high
weight
about 20KG
about 38KG
WIND SOLARHYBRID STREET LIGHT IN DAYTIME :
WIND SOLAR HYBRID STREET LIGHT IN NIGHTTIME :
CE CERTIFICATION :
Dear Mr or Mirs :
I hope your everthing goes well . i am lisa , our company produce maglev wind turbine , and selling wind solar hybrid street light !
we have many experiences of installing wind solar hybrid street light .
and we have been sold out many wind turbines for street light . so if you have a wind solar hybrid street light project , please contact with me !I promise you high quality and cheap price .
Thank you for your time .
Best regards !
lisa
specification :
Rated Power:400W
Wind wheel diameter:1.20M/1.06M
Weight:25KG
Blade Material:Aluminum Alloy
The number of blade:3
Minimum wind speed start:1m/s
Minimum power wind speed:1m/s
Minimum charge wind speed:2.5m/s
Rated wind speed:8m/s
Maximum cut off wind speed:15m/s
Resistant to wind speed limit:65m/s
The type of Generator:
Three-phase AC maglev wind turbine
Controllor output voltage:12V
Controllor output current:lower than 20Amp
Controllor brake system: Over speed automatic Three-phase short-circuit braking
Normal operating temperature:-30~50 °C
Item
Horizontal axis (HAWT)
Vertical axis (EML)
Start wind speed
High(3m/s)
Low(1m/s)
Wind conditions required
Require stable wind direction
Any wind direction
Encountered turbulence
Reduce the efficiency
Efficiency is not affected
Power stability
Change by wind direction
Without any wind effect
Noise
Large(45 decibels or more)
Low noisy(because there is no
mechanical friction)
Product shape
Normal
Beautiful
Installation height
High(need to avoid the terrain
turbulence)
Low(not afraid of turbulence)
Installation location
Just in open area like suburb
Any location
Generator material
Plastic or composite
metal
Structure strength
Poor (easy to broken)
High(high strengthen )
Resistance of wind speed
Poor(about 40 m/s)
High(about 65 m/s)
Safety in utilization
poor
high
weight
about 20KG
about 38KG
WIND SOLARHYBRID STREET LIGHT IN DAYTIME :
WIND SOLAR HYBRID STREET LIGHT IN NIGHTTIME :
CE CERTIFICATION :
beautiful shape/easy to install/300W wind turbine/generator/300w wind -solar hybrid garden lamp
1.low starting wind speed:1.5m/s
2.Large power Carbon fiber blades
3.used for garden lamp
Product Specification and Price List for Dolphin System
Remark:
1. The sample price is EXW price, which is valid in seven days.
2. delivery time: within a week; Payment: T/T, prior to delivery.
3. about 130 wind turbines sets for 20’’.
2.Large power Carbon fiber blades
3.used for garden lamp
Product Specification and Price List for Dolphin System
Remark:
1. The sample price is EXW price, which is valid in seven days.
2. delivery time: within a week; Payment: T/T, prior to delivery.
3. about 130 wind turbines sets for 20’’.
best seller 300w wind generator
horizonal wind generator
1.CE&RoHS Certificate
2.best seller
3.life span 15 years
4.start up wind speed is 1.5m/s
300w wind generator parameter:
Model
Z-300wA
Z-300wB
Name
Dolphin
Dolphin
Rated power
300w
300w
Rated DC voltage
DC12V/24V
DC12V/24V
Rated current
25A/12.5A
25A/12.5A
Rated speed
1850m/s
1850m/s
Max power
380w
380w
Starting up wind speed
3.5m/s
1.5m/s
Cut-in wind speed
3.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
Security wind speed
45m/s
45m/s
Rated wind speed
12.5m/s
12.5m/s
Engine
Three phase permanent magnet generator
Three phase permanent magnet generator
Rotor diameter
1250mm
1250mm
Blade
3pieces
3pieces
Blade material
carbon fiber
carbon fiber
Wind protection
electromagetic brake
electromagetic brake
Life span
15 years
15 years
Equipment surface protection
Aluminum oxide &plastic coating
Aluminum oxide &plastic coating
Weight
5.85kg
5.85kg
Quality guarantee period 2years
Delivery time 7-15days
P
ayment term T/T full account
Packaging carton foam
Dimension
0.06CBM=695*345*215mm
1.CE&RoHS Certificate
2.best seller
3.life span 15 years
4.start up wind speed is 1.5m/s
300w wind generator parameter:
Model
Z-300wA
Z-300wB
Name
Dolphin
Dolphin
Rated power
300w
300w
Rated DC voltage
DC12V/24V
DC12V/24V
Rated current
25A/12.5A
25A/12.5A
Rated speed
1850m/s
1850m/s
Max power
380w
380w
Starting up wind speed
3.5m/s
1.5m/s
Cut-in wind speed
3.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
Security wind speed
45m/s
45m/s
Rated wind speed
12.5m/s
12.5m/s
Engine
Three phase permanent magnet generator
Three phase permanent magnet generator
Rotor diameter
1250mm
1250mm
Blade
3pieces
3pieces
Blade material
carbon fiber
carbon fiber
Wind protection
electromagetic brake
electromagetic brake
Life span
15 years
15 years
Equipment surface protection
Aluminum oxide &plastic coating
Aluminum oxide &plastic coating
Weight
5.85kg
5.85kg
Quality guarantee period 2years
Delivery time 7-15days
P
ayment term T/T full account
Packaging carton foam
Dimension
0.06CBM=695*345*215mm
Friday, July 22, 2011
best seller wind generator 3kw from China Hummer
best seller wind generator 3kw from China Hummer
1.horizontal axis wind blade.
2.lift force wind turbine.
best seller wind generator 3kw from China Hummer
1. generator type: permanent magnetic alternator, without gearbox.
2. wind vane and anemometer instead of mechanical furling.
3. speed regulation method: yawing, electromagnetism braking
4. shutting down method: manual and automatic .
5. distributed off grid wind turbine system operation principle: the electricity from wind generator charges the batteries after being rectified and powers the loads through the inverter.
6. features intelligent charging and discharging, independent power supply.
1.horizontal axis wind blade.
2.lift force wind turbine.
best seller wind generator 3kw from China Hummer
1. generator type: permanent magnetic alternator, without gearbox.
2. wind vane and anemometer instead of mechanical furling.
3. speed regulation method: yawing, electromagnetism braking
4. shutting down method: manual and automatic .
5. distributed off grid wind turbine system operation principle: the electricity from wind generator charges the batteries after being rectified and powers the loads through the inverter.
6. features intelligent charging and discharging, independent power supply.
best seller wind system 3kw from China Hummer
3kw wind generator
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft
best seller wind system 3kw from China Hummer
1. generator type: permanent magnetic alternator, without gearbox.
2. wind vane and anemometer instead of mechanical furling.
3. speed regulation method: yawing, electromagnetism braking
4. shutting down method: manual and automatic .
5. distributed off grid wind turbine system operation principle: the electricity from wind generator charges the batteries after being rectified and powers the loads through the inverter.
6. features intelligent charging and discharging, independent power supply.
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft
best seller wind system 3kw from China Hummer
1. generator type: permanent magnetic alternator, without gearbox.
2. wind vane and anemometer instead of mechanical furling.
3. speed regulation method: yawing, electromagnetism braking
4. shutting down method: manual and automatic .
5. distributed off grid wind turbine system operation principle: the electricity from wind generator charges the batteries after being rectified and powers the loads through the inverter.
6. features intelligent charging and discharging, independent power supply.
bio-gas genset
1.use bio-gas from farm, gas form coal mine bed, land fill, oil well, coking plant
2.save fuel,high efficency,reliable,durable
Configuration & Price List on Biogas Generating Set
Powered by CUMMINS Engine
(50Hz, 1,500 RPM, Marathon Alternator)
Item
Generating Model
MC33BG-CHP
Spec.
standby power
KW
33
rated power
KW
30
frequency
Hz
50
rated voltage
V
220/400
rated ampere
A
54
power factor
COSΦ
0.8
phase
—
Three phase
speed governor
—
dedicated gas electronic governor
Speed Stability Bandwidth
%
no more than±0.1%
Steady Governing Rate
%
no more than1%
Engine
Model
CUMMINS 4BTAA3.9NG
ignition mode
ECU, sequential ignition
intake way
turbocharged
cooling method
air-air intercooling
fuel mixing way
premixing before supercharging
cylinder arrangement
4-cylinder inline
bore*stroke
(mm*mm)
102×120
Displacement
(L)
3.9
rated speed
RPM
1500
min. steady speed under no load (r/min)
RPM
1500
rated power (kW, for 12 hours)
KW
40
Biogas pressure
(kPa)
2-5.5kPa
pres. fluctuation
(kPa)
no more than 0.2kPa
heat consumption
(kJ/kW·h)
no more than10000
oil consumption
(g/kW·h )
no more than 0.6
exhaust temp.(before superchargine)
(°C)
no more than 590
exhaust temp.(after superchargine)
(°C)
no more than 550
air inlet temp. before intercooling
(°C)
no more than 120
air inlet temp. after intercooling
(°C)
no more than 30
water temp.
(°C)
no more than 80
oil temp.( in oil pan)
(°C)
no more than 121
oil pres.
(kPa)
207-345
steady-state speed regulation
%
no more than0.5%
starting mode
—
DC, 24V
cooling method
—
close-loop water cooling
lubricating type
L
pres.lubrication & splash lubrication
oil make
—
SG10W-40
maintenance
every 400hrs.
Alternator
manufacturing company
Marathon
model
MP-30-4
phase
—
Three phase
connecting method
—
SAE3#,11.5
way of excitation
self-excitation
insulation grade
—
H level
Generating Set
Control Panel
—
9902
display
—
LCD
controller type
SmartGen Digital Controller 6110A
ATS
—
optional
fuel
—
Biogas
fuel consumption
m
3
/h
no more than 15
dimension(L*W*H)
mm*mm*mm
2400×850×1350
net weight
kg
1280
soundproof enclosure
—
optional
noise
dB(A)
less than 75
protection level
—
IP23
CHP
thermal power
KW
40
temp. rise
(°C)
30
highest temp. of outlet water
(°C)
75
efficiency for exhaust gas exchanger
%
98
efficiency for jacket water exchanger
%
98
circulating water q'ty
m
3
/h
3
pump head
m
29
total efficiency
%
85
Package
package dimension(L*W*H)
mm*mm*mm
2400×850×1350
gross weight
kg
1450
package material
—
plywood packing
q'ty for a 20' ctn
Set
q'ty for a 40' ctn
Set
9902 Control System
9902 Control Panel with SmartGen Digital Controller 6110A
1.Dimension for the controller 88x75x48mm
2. LCD displays the Engine and Generator parameters
3.With complete protection function: high water temperature, low oil pressure, over-speed, emergency shutdown and etc.
4. Manual start/Remote start
5.PC configurable
6.Configurable inputs/outputs
7.Front panel configuration/mounting
8.Suitable for wide range of analogue senders
9.Back-lit LCD display for generator and engine parameters
10.Alarm indication
2.save fuel,high efficency,reliable,durable
Configuration & Price List on Biogas Generating Set
Powered by CUMMINS Engine
(50Hz, 1,500 RPM, Marathon Alternator)
Item
Generating Model
MC33BG-CHP
Spec.
standby power
KW
33
rated power
KW
30
frequency
Hz
50
rated voltage
V
220/400
rated ampere
A
54
power factor
COSΦ
0.8
phase
—
Three phase
speed governor
—
dedicated gas electronic governor
Speed Stability Bandwidth
%
no more than±0.1%
Steady Governing Rate
%
no more than1%
Engine
Model
CUMMINS 4BTAA3.9NG
ignition mode
ECU, sequential ignition
intake way
turbocharged
cooling method
air-air intercooling
fuel mixing way
premixing before supercharging
cylinder arrangement
4-cylinder inline
bore*stroke
(mm*mm)
102×120
Displacement
(L)
3.9
rated speed
RPM
1500
min. steady speed under no load (r/min)
RPM
1500
rated power (kW, for 12 hours)
KW
40
Biogas pressure
(kPa)
2-5.5kPa
pres. fluctuation
(kPa)
no more than 0.2kPa
heat consumption
(kJ/kW·h)
no more than10000
oil consumption
(g/kW·h )
no more than 0.6
exhaust temp.(before superchargine)
(°C)
no more than 590
exhaust temp.(after superchargine)
(°C)
no more than 550
air inlet temp. before intercooling
(°C)
no more than 120
air inlet temp. after intercooling
(°C)
no more than 30
water temp.
(°C)
no more than 80
oil temp.( in oil pan)
(°C)
no more than 121
oil pres.
(kPa)
207-345
steady-state speed regulation
%
no more than0.5%
starting mode
—
DC, 24V
cooling method
—
close-loop water cooling
lubricating type
L
pres.lubrication & splash lubrication
oil make
—
SG10W-40
maintenance
every 400hrs.
Alternator
manufacturing company
Marathon
model
MP-30-4
phase
—
Three phase
connecting method
—
SAE3#,11.5
way of excitation
self-excitation
insulation grade
—
H level
Generating Set
Control Panel
—
9902
display
—
LCD
controller type
SmartGen Digital Controller 6110A
ATS
—
optional
fuel
—
Biogas
fuel consumption
m
3
/h
no more than 15
dimension(L*W*H)
mm*mm*mm
2400×850×1350
net weight
kg
1280
soundproof enclosure
—
optional
noise
dB(A)
less than 75
protection level
—
IP23
CHP
thermal power
KW
40
temp. rise
(°C)
30
highest temp. of outlet water
(°C)
75
efficiency for exhaust gas exchanger
%
98
efficiency for jacket water exchanger
%
98
circulating water q'ty
m
3
/h
3
pump head
m
29
total efficiency
%
85
Package
package dimension(L*W*H)
mm*mm*mm
2400×850×1350
gross weight
kg
1450
package material
—
plywood packing
q'ty for a 20' ctn
Set
q'ty for a 40' ctn
Set
9902 Control System
9902 Control Panel with SmartGen Digital Controller 6110A
1.Dimension for the controller 88x75x48mm
2. LCD displays the Engine and Generator parameters
3.With complete protection function: high water temperature, low oil pressure, over-speed, emergency shutdown and etc.
4. Manual start/Remote start
5.PC configurable
6.Configurable inputs/outputs
7.Front panel configuration/mounting
8.Suitable for wide range of analogue senders
9.Back-lit LCD display for generator and engine parameters
10.Alarm indication
biogas equipment
The system is composed of two 10 m3 biogas plants
Biogas equipment
The system is composed of two 10 m3 biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly applied to domestic house to treat sewage and food waste.
Comparing to normal septic tank domestic septic tank biogas system has the flowing advantages:
1. Biogas is collected and used
2. No smell out
3. Out water much cleaner and can be used for gardening
Biogas equipment
The system is composed of two 10 m3 biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly applied to domestic house to treat sewage and food waste.
Comparing to normal septic tank domestic septic tank biogas system has the flowing advantages:
1. Biogas is collected and used
2. No smell out
3. Out water much cleaner and can be used for gardening
1MW biomass power plant(green to energy)
biomass gasification of internal power generation solve the environment pollution and energy utilization.
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflo
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflo
biogas generator
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biogas pump
The system is composed of two 10 m3 biogas plants
Biogas equipment
The system is composed of two 10 m3 biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly applied to domestic house to treat sewage and food waste.
Comparing to normal septic tank domestic septic tank biogas system has the flowing advantages:
1. Biogas is collected and used
2. No smell out
3. Out water much cleaner and can be used for gardening
Biogas equipment
The system is composed of two 10 m3 biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly applied to domestic house to treat sewage and food waste.
Comparing to normal septic tank domestic septic tank biogas system has the flowing advantages:
1. Biogas is collected and used
2. No smell out
3. Out water much cleaner and can be used for gardening
biomass gas generator equipment
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification generator power plant
biomass gasification generator power plant
a.environmentally friendly
b.high efficiency
c.power upto 8MW
d.high quality
biomass gasification generator power plant
Our biomass power plant produces a valuable gas named producer gas-Syngas(Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.
Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and therefore leads also to low emissions in the combustion engines.
a.environmentally friendly
b.high efficiency
c.power upto 8MW
d.high quality
biomass gasification generator power plant
Our biomass power plant produces a valuable gas named producer gas-Syngas(Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.
Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and therefore leads also to low emissions in the combustion engines.
biomass gasification power generation plant
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generation plant
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
3. save energy
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
3. save energy
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generation
Biomass Gasification power plant:
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generation
we are the biggest company in China which supply complete biomass gasification power plant. we provide turn-key service...
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generation
Biomass Gasification power plant:
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generation
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1cylinder gasoline generator
1.1cylinder gasoline generator ,competitive price
2.certified engine
3.joint venture technique
4.ISO9001
company operation principles
1.gasoline generator with high quality and competitive price
provide the best quality products and nice price to customers
2.frank and honest
frankly and honestly treat to all the customers
3.respect people
respect every person anywhere,anytime
4.seek excellence
produce top quality products , provide good service , employ excellent people , ensure the efficient operation and development of company .
products features
specification
Model
ZTQF1200
ZTQF2500
ZTQF2500 AVR3
ZTQF3200
ZTF3500 DR
ZTQ3500 AVR3 DR
ZTQF7500-3
ZTQF7500D WR
Generator Specification
Genset Type
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
3-Phase
Single-phase
AC Frequency (HZ)
50
50
50
50
50
50
50
50
AC Voltage (V)
220V
220V
220V
220V
220V
220V
380V
220V
Cont.AC Output (KW)
1.0KW
2.0KW
2.0KW
2.5KW
2.8KW
2.8KW
6.5KW
6.5KW
Max.AC Output (KW)
1.2KW
2.2KW
2.2KW
2.8KW
3.0KW
3.0KW
6.7KW
6.7KW
Rated currenct(A)
3.6A
9
9
11
12
12
28
28
Max.current(A)
4A
10
10
12.5
13
13
29
29
Engine Specification
Engine Model
ZT154F
ZT170F
ZT170F
ZT170F
ZT170F
ZT170F
ZT190F
ZT190F
Power Factor (COS)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Bore*Stroke (mm)
52*46
70*54
70*54
70*54
70*54
70*54
90*64
90*64
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
105
210
210
210
210
210
419
419
Engine Speed (RPM)
3000
3000
3000
3000
3000
3000
3000
3000
Starting System
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start/ Electric start
Handle Recoil start
Handle Recoil start
(Electric start optional)
Electric start
Max .Power Output (HP)
2.5HP
7.0HP
7.0HP
7.0HP
7.0HP
7.0HP
15.0HP
15.0HP
Fuel Tank Capacity (L)
8L
15L
15L
15L
15L
15L
25L
25L
Cont. Operating (HRS)
10h
10h
10h
10h
10h
10h
10h
10h
Operating Noise Level (dB)
68dB
68dB
68dB
68dB
68dB
68dB
75dB
75dB
Automatic circuit protection device
Y
Y
Y
Y
Y
Y
Y
Y
Engine oil level warning alarm
Y
Y
Automatic Voltage Regulation
Y
Y
Y
Y
Y
Y
2.certified engine
3.joint venture technique
4.ISO9001
company operation principles
1.gasoline generator with high quality and competitive price
provide the best quality products and nice price to customers
2.frank and honest
frankly and honestly treat to all the customers
3.respect people
respect every person anywhere,anytime
4.seek excellence
produce top quality products , provide good service , employ excellent people , ensure the efficient operation and development of company .
products features
specification
Model
ZTQF1200
ZTQF2500
ZTQF2500 AVR3
ZTQF3200
ZTF3500 DR
ZTQ3500 AVR3 DR
ZTQF7500-3
ZTQF7500D WR
Generator Specification
Genset Type
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
Single-phase
3-Phase
Single-phase
AC Frequency (HZ)
50
50
50
50
50
50
50
50
AC Voltage (V)
220V
220V
220V
220V
220V
220V
380V
220V
Cont.AC Output (KW)
1.0KW
2.0KW
2.0KW
2.5KW
2.8KW
2.8KW
6.5KW
6.5KW
Max.AC Output (KW)
1.2KW
2.2KW
2.2KW
2.8KW
3.0KW
3.0KW
6.7KW
6.7KW
Rated currenct(A)
3.6A
9
9
11
12
12
28
28
Max.current(A)
4A
10
10
12.5
13
13
29
29
Engine Specification
Engine Model
ZT154F
ZT170F
ZT170F
ZT170F
ZT170F
ZT170F
ZT190F
ZT190F
Power Factor (COS)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Bore*Stroke (mm)
52*46
70*54
70*54
70*54
70*54
70*54
90*64
90*64
Engine Type
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Air Cooled, 4 Stroke, OHV Gasoline, Single Cylinder
Displacement (CC)
105
210
210
210
210
210
419
419
Engine Speed (RPM)
3000
3000
3000
3000
3000
3000
3000
3000
Starting System
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start
Handle Recoil start/ Electric start
Handle Recoil start
Handle Recoil start
(Electric start optional)
Electric start
Max .Power Output (HP)
2.5HP
7.0HP
7.0HP
7.0HP
7.0HP
7.0HP
15.0HP
15.0HP
Fuel Tank Capacity (L)
8L
15L
15L
15L
15L
15L
25L
25L
Cont. Operating (HRS)
10h
10h
10h
10h
10h
10h
10h
10h
Operating Noise Level (dB)
68dB
68dB
68dB
68dB
68dB
68dB
75dB
75dB
Automatic circuit protection device
Y
Y
Y
Y
Y
Y
Y
Y
Engine oil level warning alarm
Y
Y
Automatic Voltage Regulation
Y
Y
Y
Y
Y
Y
biomass gasification power generation
we are the biggest company in China which supply complete biomass gasification power plant. we provide turn-key service...
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power generator
we are the biggest company in China which supply complete biomass gasification power plant. we provide turn-key service...
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power plant equipment
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power plant equipment
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasification power plant
biomass gasification power plant
a.environmental protection
b.energy saving
c. high efficiency
d. reasonable price
biomass gasification power plant
We supply full set of biomass gasification power plant
The biomass gasification power plant produces a valuable gas named producer gas-Syngas (Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0 MW bu using a few parallel modular units.
Since biomas itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emissions (NOx) when manufacturing the Syngas and thereafter leads also to low emissions in th ecombustion engines.
a.environmental protection
b.energy saving
c. high efficiency
d. reasonable price
biomass gasification power plant
We supply full set of biomass gasification power plant
The biomass gasification power plant produces a valuable gas named producer gas-Syngas (Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0 MW bu using a few parallel modular units.
Since biomas itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emissions (NOx) when manufacturing the Syngas and thereafter leads also to low emissions in th ecombustion engines.
biomass gasification power plant
Biomass Gasification station
1.Biomass gas supply system
2.Energy saving equipment
3.Environmental friendly
Raw material gas supply system consists of feeder, gasifier, cyclone, scrubber, vacuum, clean separation, gas storage tank, pipe network and other components, compared with ordinary small biomass gasifier gas supply, in addition to the huge system specifications, but also with automatic devices and large-capacity gas storage cabinets, gas supply of biomass materials engineering systems with straw gasification, gas cleaning, automatic separation of functions. Biomass raw material (straw) into a combustible gas, and automatically import the resulting gas separation system produces high-quality purified gas cleaning device, the user can be an endless supply of quality gas and transported through the pipe network to the user terminal, with in daily life, water heating, cooking, cooking, heating, bathing, etc., burning is complete, great savings and replacing coal, gas, natural gas, electricity and other energy sources.
Biomass gasification gas technology can not only effectively reduce the traditional rural past environmental pollution caused by burning Tuzao, but also can improve the biomass energy conversion efficiency, can significantly improve conditions in rural areas and the quality of farmers' life.It is said to be as "one ignition, household cooking," which enriches the people of rural area renewable energy projects.
Biomass (straw) biomass gasification is a thermochemical conversion technology, the basic principle is that under the conditions of incomplete combustion of biomass raw material heated to a high molecular weight organic hydrocarbon cracking, become more low molecular weight CO, H2, CH4 and other combustible gases. Biomass from carbon, hydrogen, oxygen and other elements and ash composition, when they are lit, only a small amount of air supply and control the reaction process, the carbon and hydrogen into the carbon monoxide, hydrogen, methane and other components of the combustible gas straw. Most of the energy is transferred to the gas, which is the gasification process. Removal of combustible gas in the ash, tar and other impurities into the farmers' home through the supply system , the users can open the valve, ignite gas stove and boil water to cook.
1.Biomass gas supply system
2.Energy saving equipment
3.Environmental friendly
Raw material gas supply system consists of feeder, gasifier, cyclone, scrubber, vacuum, clean separation, gas storage tank, pipe network and other components, compared with ordinary small biomass gasifier gas supply, in addition to the huge system specifications, but also with automatic devices and large-capacity gas storage cabinets, gas supply of biomass materials engineering systems with straw gasification, gas cleaning, automatic separation of functions. Biomass raw material (straw) into a combustible gas, and automatically import the resulting gas separation system produces high-quality purified gas cleaning device, the user can be an endless supply of quality gas and transported through the pipe network to the user terminal, with in daily life, water heating, cooking, cooking, heating, bathing, etc., burning is complete, great savings and replacing coal, gas, natural gas, electricity and other energy sources.
Biomass gasification gas technology can not only effectively reduce the traditional rural past environmental pollution caused by burning Tuzao, but also can improve the biomass energy conversion efficiency, can significantly improve conditions in rural areas and the quality of farmers' life.It is said to be as "one ignition, household cooking," which enriches the people of rural area renewable energy projects.
Biomass (straw) biomass gasification is a thermochemical conversion technology, the basic principle is that under the conditions of incomplete combustion of biomass raw material heated to a high molecular weight organic hydrocarbon cracking, become more low molecular weight CO, H2, CH4 and other combustible gases. Biomass from carbon, hydrogen, oxygen and other elements and ash composition, when they are lit, only a small amount of air supply and control the reaction process, the carbon and hydrogen into the carbon monoxide, hydrogen, methane and other components of the combustible gas straw. Most of the energy is transferred to the gas, which is the gasification process. Removal of combustible gas in the ash, tar and other impurities into the farmers' home through the supply system , the users can open the valve, ignite gas stove and boil water to cook.
biomass gasification power plant
1,biomass: rice husk, straws,sewage, MSW,coconut shell, wood chips, foreast wastes, cotton straws---
2, capacity: 50KW-3MW
Application for new energy.
2, capacity: 50KW-3MW
Application for new energy.
biomass gasification
Biomass Gasification power plant:
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. can change waste into wealth
Agriculture and forest residues, such as rice husk, crop
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass gasifier for power generation and heating100-20000KW
20 Years Biomass Gasification power plant EPC experience(Circulating fluidized bed(cfb) gasifier and fixed bed gasifier.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.
Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.
Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).
Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.
Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.
Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).
Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.
biomass gasifier generator
biomass fuel: rice husk, coconut husk, wood chip, saw dust, straw, tree branch, bagasse, twig timber etc.
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1kw Small wind turbines
1kW Small wind turbines
(1) aesthetic appearance
(2) high technology
(3) light weight
(4) The breeze started
1kW Small wind turbines
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
(1) aesthetic appearance
(2) high technology
(3) light weight
(4) The breeze started
1kW Small wind turbines
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
biomass gasifier power generation
biomass fuel: rice husk, coconut husk, wood chip, saw dust, straw, tree branch, bagasse, twig timber etc.
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Subscribe to:
Posts (Atom)