20 Years Biomass Gasification power plant EPC experience(Circulating fluidized bed(cfb) gasifier and fixed bed gasifier.
The principle of JAE’s biomass gasification system(abbreviated as BGPS) is to convert by-products or wastes of agriculture and forestry (including rick husks, wood powder, branches, offcuts, corn straws, rice straws, wheat straws, cotton straws, fruit shells, coconut shells, palm shells, bagasse, corncobs,) into syngas. Syngas is then used as fuel in gas engine to generate electricity. Biomass gasification well conquers the disadvantages of biomass, such as low flammability and wide diversity. Biomass gasification system is characteristic of small land requirement and environment friendly. It’s one of the most effective and cleanest way of utilizing biomass.
Our biomass gasification process includes three steps. First step is biomass gasification, which convert biomass into syngas. Second step is syngas purification. The producer gas coming from gasifier usually contains contaminants including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. Third step is power generating in gas engine. The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water civil use or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.
Modulization is adopted in JAE’s BGPS. JAE-BGPS is applicable for the biomass power plant ranging from 100KW to 20000KW. 500rpm~600rpm gas engine and Siemens generator are chosen in our gas gensets (400KW, 500KW, 800KW, 1000KW, 1200KW). Fix bed system or fluidized bed system may be chosen according to different feedstock characteristics in JAE-BGPS (single system capacity ranging from 100KW to 2MW).
Comparing with other renewable power generating system, JAE-BGPS is characteristic of:
1). Flexibility. Gas engine, gas turbine and even waste heat recovery boiler may be used considering various power plant capacity requirements. It ensures high power generating efficiency. Different capacities of biomass power generation plant can be designed with various types of JAE-BGPS system.
2). Clean technology. Biomass, as one kind of renewable energy, may reduce the emission of carbon dioxide, sulfur dioxide causing from fossil fuel. Nitrogen oxides emission is very limited in our biomass gasification power generating system because of low temperature (700~900 degree centigrade).
3). Economic. JAE-BGPS is capacity flexible. Even small size biomass power plant is also profitable. Simple process and less land requirements make biomass gasification power plant more economic comparing with other renewable energy. Generally speaking, biomass gasification power generating is the most economic technology in renewable power generating plant, the cost of which is nearly the same as small sized conventional power plant.
Thursday, July 21, 2011
biomass generator equipment
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
1. suitable for sawdust, wood chips, straw
2. used for industry, home
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull,
wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass generator in energy
biomass gasification of internal power generation solve the environment pollution and energy utilization.
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow
biomass power plant
biomass power plant
a. environmentally friendly
b. high efficiency
c. good service
d, high quality and reasonable price
biomass power plant
Our biomass power plant produces a valuable gas named producer gas-Syngas(Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.
Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and therefore leads also to low emissions in the combustion engines.
a. environmentally friendly
b. high efficiency
c. good service
d, high quality and reasonable price
biomass power plant
Our biomass power plant produces a valuable gas named producer gas-Syngas(Synthetic gas). The biomass (agricultural), used for this purpose is straw like materials such as: rice stems, rice husks, cotton stalks, corn stalks, millet stalks, wood dust, cane trash, wheat straws, hemp palm husks and other forms of biomass. This system can produce electric power in the range of 200KW-6.0MW by using a few parallel modular units.
Since biomass itself is almost sulfur free, the gasification process will not produce any sulfur oxide emissions (SOx). However, fuels such as diesel and HFO contain a considerable amount of sulfur. HFO could have as much as 4% sulfur and therefore requires special additional treatment to neutralize these emissions.
Similarly the gasification of biomass produces very low concentrations of nitrous oxide emission (NOx) when manufacturning the Syngas and therefore leads also to low emissions in the combustion engines.
blade bushing
windpower blade parts, professional manufacturer(OEM/ODM )
ISO9001
Competitive price
Superior quality
Fast delivery
windpower blade parts,pre-cast screw bushing
fittings in the picture is just one part of our products.
we produce all kinds of machinery parts ,such as windpower blade parts,solar energe equipment parts, microwave equipment components,atomatization control components ,textilemachinery equipment components, instruments equipments components,automobile components ,railway equipment components etc.All the turning parts or milling parts are produced with full specifications and diversity in materials(mainly stainless steel,iron,aluminum,copper etc.).we are able to meet our customer's different demands easily.we can manufacture all the machinery components according to customer's drawings,and offer verities surface treatment. Advanced technology guarantees our quality,our products have abtained the certification of ISO. Your satification is our eternal court! welcome to our company for business.
ISO9001
Competitive price
Superior quality
Fast delivery
windpower blade parts,pre-cast screw bushing
fittings in the picture is just one part of our products.
we produce all kinds of machinery parts ,such as windpower blade parts,solar energe equipment parts, microwave equipment components,atomatization control components ,textilemachinery equipment components, instruments equipments components,automobile components ,railway equipment components etc.All the turning parts or milling parts are produced with full specifications and diversity in materials(mainly stainless steel,iron,aluminum,copper etc.).we are able to meet our customer's different demands easily.we can manufacture all the machinery components according to customer's drawings,and offer verities surface treatment. Advanced technology guarantees our quality,our products have abtained the certification of ISO. Your satification is our eternal court! welcome to our company for business.
blades of wind turbine
Best quality
Low price
Good service
The factory can produce the blades of 100W--30KW wind generator.
The materialand of the blades is reinforced fibber glass. Long service time. Low price.
Low price
Good service
The factory can produce the blades of 100W--30KW wind generator.
The materialand of the blades is reinforced fibber glass. Long service time. Low price.
blades
10kw wind power generator
1.Easy to install and operate
2.No noise
3.High efficiency,security,stablity
4.Good surface-CE,ISO
10kw wind power generator
Technical parameters:
Model:BF-H-10KW
Generator Type: permanent magnetic direct drive VTAW, 3 phase AC
Power(w)
10000
Rated wind speed
(m/s)
12
Rotor diameter
(m)
6
Start-up wind speed
(m/s)
3.8
Height of blade
(m)
6.6
Range of working wind speed(m/s)
3.8-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/5
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
100r/min
Output Voltage
AC380/600V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
30%-40%
Sweep wind area
28.26
Range of working temperature
-45°C-60°C
Suggested supporting battery
32pcs12v200ah
Top weight (kg)
660
Tower type and height
Free standing tower/10m
Notes:
1.The tower height can be changed according to your requirement.
2.Our wind turbines have the CE,ISO9001 certificates.
3.If there is anything not clear,please feel free to contact me.
1.Easy to install and operate
2.No noise
3.High efficiency,security,stablity
4.Good surface-CE,ISO
10kw wind power generator
Technical parameters:
Model:BF-H-10KW
Generator Type: permanent magnetic direct drive VTAW, 3 phase AC
Power(w)
10000
Rated wind speed
(m/s)
12
Rotor diameter
(m)
6
Start-up wind speed
(m/s)
3.8
Height of blade
(m)
6.6
Range of working wind speed(m/s)
3.8-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/5
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
100r/min
Output Voltage
AC380/600V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
30%-40%
Sweep wind area
28.26
Range of working temperature
-45°C-60°C
Suggested supporting battery
32pcs12v200ah
Top weight (kg)
660
Tower type and height
Free standing tower/10m
Notes:
1.The tower height can be changed according to your requirement.
2.Our wind turbines have the CE,ISO9001 certificates.
3.If there is anything not clear,please feel free to contact me.
Subscribe to:
Posts (Atom)