4kw Diesel Generator

1,12 volt D.C. auxiliary charging
2,Circuit breaker
3,12.5L fuel tank
4,AVR alternator
5,low oil shutdown system
4kw diesel generator

4mw biomass gasification power generation plant

biomass gasification of internal power generation solve the environment pollution and energy utilization.
Specifications
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow

5 Blades 1KW wind turbine

1. 30% more electricity generated
2. Pitch controlled
3. Aerodynamic brake
4. Maintenance free
5. Low start-up windspeed
Features of 1KW Wind tune:

1.Generator designed with magnetic saturation function can work for 20years under normal care.
2.Electromotor use low torque start-up technology (2m/s start-up wind speed).

3.Appearance use rudderless design and electronic yawing system.
4.PWM constant voltage recharge function provides stable output.

5.Electronic brake and manual brake,optional.
6.Automatic yaw and manual yaw,optional.

7.Security wind speed setting will yaw the turbine 90 to the wind direction when exceed the setting.
8.Controller will dump load for protection when the voltage goes high.

9.Controller with cable twist counter will untie the twisted cables every 3 circles.
10. warranty: 3 years
11. life time: 20years

Rated Output Power
1000W
Rated Wind Speed
9m/s
Startup Wind Speed
2m/s
Cut-in Wind Speed
2.5m/s
Safety Wind Speed
50m/s
Rated Output Voltage
24V/48V
Rated Rotary
750r/m
Generator Type
Brushless NdFeB Permanent-Magnet Generator
Overspeed Protection
Electromagnetic Torque Control
Furling Type
Mechanical



Update Date:2011-10-25 19:26:33

5 KW wind turbine generator

5KW wind turbine generator,1. Pitch controlled 2. Aerodynamic brake 3. Maintenance free 4..Excellent in quality,5,Long life
5KW wind turbine generator :
Introduction
We are manufacturer of wind turbines,wind turbine generators,wind turbine systems.
our products range from 150W to 300KW,We have our own factory and professional engineers who engaged in researching motor for more than ten years
5kw pitch controlled wind turbine, newly developed by Qingdao Juneng wind power technique Co,.Ltd is a patented product and pioneer in domestic. The self-developed centrifugal pitch controlled mechanism of Wind turbine adjusts blade pitch following wind rotor rotating speed, and keep wind turbine at rated rotating speed. The wind turbine has a stable output power and safe running and is maintenance free. Wind rotor never goes to over speed even encounter to variable wind speed and strong gale. Low wind speed start up, pitch regulation, safe system
Characteristics
1. Optimum aerodynamic shape design: high efficiency, low noise.
2. Centrifugal pitch controlled mechanism: 3m/s low wind speed startup; 3-12m/s wind speed, following wind rotor rotate speed to adjust blade angle at optimum TSR, run in high efficiency; over rated wind speed, wind rotor never goes to over speed and has stable control; 3-35m/s wind speed, wind turbine can run smoothly.
3. Direct drive permanent magnet generator, low startup resistance moment, constant running ability of over loading 1.5 times, maintenance free for more than 30000 hour.
4. Safety control: has aerodynamic brake, electric magnet brake, mechanical brake and manual stop mechanism.
5. Sealed slip ring, no cable twist;
6. Streamline design.
7. Long acting anticorrosive treats, no corrosion in 15years.
Technical parameter
Model
FD-5000w
Rated power(W)
5000
Rated voltage(V)
230
Rotor diameter(m)
6.4
Start-up wind speed(m/s)
3
Rated wind speed(m/s)
12
Work wind speed(m/s)
6~30
Security wind speed(m/s)
35
Rated rotating speed(r/m)
220
Blade material
glass fiber
Blade quantity
3
Guy cable tower
Tower height(m)
12
Tower diameter(mm)
Φ159*5
Suggested batteries capacity
12V200AH(18 pieces)

5 KW wind turbine

wind generator,1. Pitch controlled 2. Aerodynamic brake 3. Maintenance free 4..Excellent in quality,5,Long life
5KW wind turbine :
Introduction
We are manufacturer of wind turbines,wind turbine generators,wind turbine systems.
our products range from 100W to 100KW,We have our own factory and professional engineers who engaged in researching motor for more than ten years
5kw pitch controlled wind turbine, newly developed by Qingdao Juneng wind power technique Co,.Ltd is a patented product and pioneer in domestic. The self-developed centrifugal pitch controlled mechanism of Wind turbine adjusts blade pitch following wind rotor rotating speed, and keep wind turbine at rated rotating speed. The wind turbine has a stable output power and safe running and is maintenance free. Wind rotor never goes to over speed even encounter to variable wind speed and strong gale. Low wind speed start up, pitch regulation, safe system
Characteristics
1. Optimum aerodynamic shape design: high efficiency, low noise.
2. Centrifugal pitch controlled mechanism: 3m/s low wind speed startup; 3-12m/s wind speed, following wind rotor rotate speed to adjust blade angle at optimum TSR, run in high efficiency; over rated wind speed, wind rotor never goes to over speed and has stable control; 3-35m/s wind speed, wind turbine can run smoothly.
3. Direct drive permanent magnet generator, low startup resistance moment, constant running ability of over loading 1.5 times, maintenance free for more than 30000 hour.
4. Safety control: has aerodynamic brake, electric magnet brake, mechanical brake and manual stop mechanism.
5. Sealed slip ring, no cable twist;
6. Streamline design.
7. Long acting anticorrosive treats, no corrosion in 15years.
Technical parameter
Model
FD-5000w
Rated power(W)
5000
Rated voltage(V)
230
Rotor diameter(m)
6.4
Start-up wind speed(m/s)
3
Rated wind speed(m/s)
12
Work wind speed(m/s)
6~30
Security wind speed(m/s)
35
Rated rotating speed(r/m)
220
Blade material
glass fiber
Blade quantity
3
Guy cable tower
Tower height(m)
12
Tower diameter(mm)
Φ159*5
Suggested batteries capacity
12V200AH(18 pieces)

5 years warranty wind generator 300wA for street lamp

small wind generator:
1.Make and develop by ourselves
2.CE and Rhos Certificate available
3.Good price,high quality

Wind generator part
Model
Z-300
Name
Dolphin
Rated power
300W
Rated DC voltage
DC 12V/24V
Rated current
25A/12.5A
Rated speed
1850r/m
Max power
380W
Number of blade
3 pcs
Starting wind speed
3.5m/s
Cut-in wind speed
3.5m/s
Cut-out wind speed
18m/s
Security wind speed
45m/s
Rated wind speed
12.5m/s
Engine
Three-phase permanent magnel generator
Rotor diameter
1170mm
Blade material
Carbon fiber
Output line anti-winding device
Overall three-phase commutator
Over-speed wind protection
Tip stall protection + turned protection + Electromagnetic brake
Life span
15 years
Equipment surface protection
Aluminum oxide + plastic coating
Working temperature
-45°C-70°C
N.W.
6.4kg
Packing material
Carton box and foam material
packing dimension
720*390*210mm
G.W.
7.5kg

This is our
new
model, if you're interested in, pls get in touch with us at any time.

5.5kw Diesel Generator

1,12 volt D.C. auxiliary charging
2,Circuit breaker
3,12.5L fuel tank
4,AVR alternator
5,low oil shutdown system

Certificates: SA,EPA,TUV,CE,ETL,GS,SONCAP