Electricity Generation

Sunday, August 28, 2011

1.5KW wind energy generator (CE MARK)

1. Easy install and operation
2. Long lifetime and quality guarantee
3. Beautiful appearance and low noise
4.More electricity

Model: ZH1.5KW
Rated Power: 1500 Watts
Maximum Power: ~ 1800 Watts
Type: 3 Blade Upwind
Rotor Diameter: 3.2 m (10.4ft.)
Start-up Wind Speed: 2.5 m/s(5.6 mph)
Cut-in Wind Speed: 3m/s (6.7mph)
Rated Wind Speed: 10 m/s(22mph)
Cut-Out Wind Speed: None
Furling Wind Speed: 18 m/s (40mph)
Max. Design Wind Speed: 50 m/s (112mph)
Blade Pitch Control: None, Fixed Pitch
Overspeed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 24VDC,48 VDC Nominal
Rotate Speed(r/min)
VDC
Amp
WATT
145
28

188
28
4.6
128.8
219
28
11.6
324.8
255
28
19.2
537.6
282
28
25.7
719.6
303
28
31.2
873.6
331
28
36.1
1010.8
361
28
41.7
1167.6
404
28
47.4
1327.2
457
28
53.1
1486.8
501
28
64.6
1808.8

12kv metal-clad withdrawable switchgear

1,AI-Zn-plated steel sheet;
2,Automatic clotted-dew controller;
3,100% interchangeability to the same handcart;
4,IP4X.
The body structure is spliced with (2mm) AI-Zn-plated steel sheet, which underwent repeated edge forces,could anti corrosion and anti-oxidation without any treatment on the surface.

Uses homemade vacuum circuit breaker such as,VS1,VTP or ABB's VD4 as the main switch.

Equipped with automatic clotted-dew controller effectively to prevent condensation and improve the insulation level.

The same size handcart with 100% interchangeability.

Simple reliable mechanical interlocking to meet the requirement of fail-safe unit.

Passed Condensation Test and Internal Arc Fault Test.

Mechanical life can reach 20000 times, electrical endurance can reach 50 times (31.5kA).

Moulded PVDF boards

Specification:1M*2M Length,8-80mm thickness.
Characteristic: good mechanical properties, wheatherability, anti-radiation.
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000

PVDF sheet ,Board conforms to the respective standards

Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .

Moulded PVDF boards

Multi functional Vacuum Insulation Oil Regeneration Device

1-Vacuum degasifying;
2-Remove out particles, carbons,etc.
3-Vacuum filling oil on line;
4-Vacuum Drying.
5-Reclaim worn oil
General:

This multi-functional high-effective vacuum oil purifier have multi-functions, such as, vacuum separation, precision filtering, pressure filtering, regenerating and de-aciding, drying the transformers. It can realize the functions ofde-aciding, de-watering, de-coloring,reducing the dielectric loss, removing impurities, raising the flashing point, heating circulation and drying and reach the effect of" one machine,multi uses".

PARAMETER:

Index
Unit
Regeneration Machine
Flow rate
L/Min.
30-300Liter/Min.
Working pressure
Mpa
less than 0.4
Working noise
dB(A)
≤75
Power supply
N/A
AC 380V/3Ph
Total electric power
KW
0.75KW-1.8KW
Pipe diameter
mm
Φ25-60
Flash point (closed)
N/A
≥135°C
Water soluble acid
N/A
PH≥5.4
Medium wearing factor
N/A
tgδ(90°C)%≤0.005
Acid value
N/A
≤0.001mgK0H/g