LNE vacuum used oil recycling machine is to recover the used lube and lubricant oil by remove water, impurities and gas.
APPLICATION:
Thermoelectric generating set, hydroelectric generating set, nuclear power plant, industrial turbine set and other industries where the turbine oil is used.
BRIEF INTRODUCTION
It is generally recognized that
water is an enemy
of turbine lubricating oils. Water in oils impairs its lubricating properties and increases the rate of oxidization, develops sludge formation and causes costly corrosion to equipment.
Since it is often impossible to prevent water from entering the lubricating system, it is EXTREMELY important to remove it from the oil before it causes permanent damage. At the meantime, DIRTS and IMPURITIES mixed up with lube fluids.
Coalescence and Separation Filtration Techniques
Emulsion breaker is specially for turbine lube oil, which has Hydrophila Coalescence Filter and Water-resistance Separation Filter.
Coalescence Filter
: tiny water drops get together into bigger water drops, then
sizable water
drops fall down into catchwater channel due to gravity.
Separation Filter:
water drops are blocked here.
Dehydration and Degassing Principles
Boiling point of water is low under Vacuum condition, avoid the harm to the oil by heating.
Degassing Tank is using the most optimized design. The oil is exposed in a vacuum in the largest surface, which increased oil’s trip in degassing tank. Water and gas in oil have enough time for vaporization, hence, they can be removed efficiently.
OIL PURIFIER FEATURES
l
Oil level control techniques
l
Electrical interlock protection technology
l
Cooling Technology
l
Equipment and pipeline connection technology
l
Noise reduction technology
l
Methane control technology
l
Machine construction
Sunday, June 5, 2011
vacuum used transformer oil filter machine
vacuum used transformer oil filter machine
remove water and gas 100%
longer the transformer's life
save cost on oil
remove water and gas 100%
longer the transformer's life
save cost on oil
vawt the ce wind power energy generator
wind power energy generator
1.supply 300W-50KW generators
2.20-22 years life span
3.CE approved
4.Lead time in 6 days
vawt the ce wind power energy generator
Basic technical parameters
Rated power
1000W
Max power
1500W
Output voltage
48V
Blade diameter
3.2m
Rated wind speed
8m
/s
Start up wind speed
3m
/s
Work wind speed
3-25m/s
Security wind speed
50m
/s
Top quality except tower
95kg
Height of tower
6m
Rated Rotate Speed
400r/min
Speed regulation
Leaning tail + electric brake
Suggested battery type
12V 100Ah 4pcs
1.supply 300W-50KW generators
2.20-22 years life span
3.CE approved
4.Lead time in 6 days
vawt the ce wind power energy generator
Basic technical parameters
Rated power
1000W
Max power
1500W
Output voltage
48V
Blade diameter
3.2m
Rated wind speed
8m
/s
Start up wind speed
3m
/s
Work wind speed
3-25m/s
Security wind speed
50m
/s
Top quality except tower
95kg
Height of tower
6m
Rated Rotate Speed
400r/min
Speed regulation
Leaning tail + electric brake
Suggested battery type
12V 100Ah 4pcs
vawt vertical axis wind turbine wind driven generator 1000w
vawt vertical axis wind turbine wind driven generator 1000w
1.pure sine wave inverter
2.home use
3.frp blades
4.copper wire
vawt vertical axis wind turbine wind driven generator 1000w
Model GE: V-1KW
diameter of blades: 2.5m
FRP blades number: 5
FRP blades length: 1650
rated rotate speed: 50(r/min)
rated wind speed: 10m/s
start up wind speed: 2.5m/s
working wind speed: 3-25(m/s)
rated power: 1KW
max power: 1.5KW
output voltage(DC): 24V /48V
height of tower: 8m
tower type(mm): guyed
output control system: charge controller,inverter
battery reference:12V100ah, 4pcs
1.pure sine wave inverter
2.home use
3.frp blades
4.copper wire
vawt vertical axis wind turbine wind driven generator 1000w
Model GE: V-1KW
diameter of blades: 2.5m
FRP blades number: 5
FRP blades length: 1650
rated rotate speed: 50(r/min)
rated wind speed: 10m/s
start up wind speed: 2.5m/s
working wind speed: 3-25(m/s)
rated power: 1KW
max power: 1.5KW
output voltage(DC): 24V /48V
height of tower: 8m
tower type(mm): guyed
output control system: charge controller,inverter
battery reference:12V100ah, 4pcs
vertical anxis wind generator
1.high efficiencey
2.low start-up wind speed
3.best after service
4.beautiful curve
Model
CH-50
CH-150
CH-250
Name
Wind butterfly
Wind butterfly
Wind butterfly
Rated power
50W
150W
250w
Rated DC voltage
DC 12V
DC 12V
DC 12V/24V
Rated current
4.1A
12.5A
20A/10A
Rated speed
220r/m
178r/m
165r/m
Max power
65W
200W
300W
Number of blade
2 pcs
2 pcs
2 pcs
Starting wind speed
2m/s
2m/s
2 m/s
Cut-in wind speed
2.5m/s
2.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
18m/s
Security wind speed
36m/s
35m/s
35m/s
Rated wind speed
13m/s
13m/s
13m/s
Engine
Three-phase permanent magnet generator
Three-phase permanent magnet generator
Three-phase permanent magnet generator
Rotor diameter
450mm
600mm
900mm
Blade material
Carbon fiber reinforced plastics
Carbon fiber reinforced plastics
Blade material
Output line anti-winding device
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
Over-speed wind protection
Electromagnetic brake
Electromagnetic brake
Electromagnetic brake
Life span
15 years
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-40°C-70°C
-40°C-70°C
-40°C-70°C
2.low start-up wind speed
3.best after service
4.beautiful curve
Model
CH-50
CH-150
CH-250
Name
Wind butterfly
Wind butterfly
Wind butterfly
Rated power
50W
150W
250w
Rated DC voltage
DC 12V
DC 12V
DC 12V/24V
Rated current
4.1A
12.5A
20A/10A
Rated speed
220r/m
178r/m
165r/m
Max power
65W
200W
300W
Number of blade
2 pcs
2 pcs
2 pcs
Starting wind speed
2m/s
2m/s
2 m/s
Cut-in wind speed
2.5m/s
2.5m/s
2.5m/s
Cut-out wind speed
18m/s
18m/s
18m/s
Security wind speed
36m/s
35m/s
35m/s
Rated wind speed
13m/s
13m/s
13m/s
Engine
Three-phase permanent magnet generator
Three-phase permanent magnet generator
Three-phase permanent magnet generator
Rotor diameter
450mm
600mm
900mm
Blade material
Carbon fiber reinforced plastics
Carbon fiber reinforced plastics
Blade material
Output line anti-winding device
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
FRP (Fiber glass-Reinforced plastics )
Over-speed wind protection
Electromagnetic brake
Electromagnetic brake
Electromagnetic brake
Life span
15 years
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-40°C-70°C
-40°C-70°C
-40°C-70°C
vertical axis 500W wind generator VAWT in qingdao
1.wind turbine
2.Low start-up wind speed
3.Easy to install &operate
4.No maintenance required
5.CE
vertical axis 500w wind turbine (VAWT)
About us
We are Qingdao hongkun wind power equipment CO;LTD
We are the specializing manufacturer of vertical axis wind turbine, horizontal axis wind turbine and wind and solar panels.
We will give you the best price
Our motor is the PMG ,which has no gears, directly drive, and free maintenance.
the information
Wind turbines use rare earth permanent magnet materials
Using high-quality bearings made wind turbines have strong magnet and other components radiation heat and low demagnetization rate
The body is made of high-quality steel pipes or ductile iron. It have a good anticorrosion treatment , prevent wind sanding, salt spraying and other rosining .The suitable temperature below zero 40 to 60 degree
Lower wind speed can generate electricity including wind speed of 2m/s which is a professional magnetic circuit design
The part of rotary body use a closed transmission slip ring, so the cable won't get tangled up
Because of less ground demand and low geology requirement, you can install it in the hills, the beach, river bank, desert terrain etc.
generator sets stable operation and has reliable quality that the design life of 20 years for an investment long-term benefits
Wind turbine blades are made of compound glass fiber informed plastic
Technical paramenter
`model
500w
The diameter of wind wheel
1.6m
The rotate speed (r/min)
180
Rate wind speed
10m/s
Start up wind speed (m/s)
2.5
Working up wind speed(m/s)
3-25
security wind speed (m/s)
50
Rated power
500w
The max power
650W
Voltage(DC)
24v
The height of tower(m)
8m
Guy cable tower type(mm)
114*6
Output control system
Charger Control inverter
Battery reference
12v100ap 2pcs
2.Low start-up wind speed
3.Easy to install &operate
4.No maintenance required
5.CE
vertical axis 500w wind turbine (VAWT)
About us
We are Qingdao hongkun wind power equipment CO;LTD
We are the specializing manufacturer of vertical axis wind turbine, horizontal axis wind turbine and wind and solar panels.
We will give you the best price
Our motor is the PMG ,which has no gears, directly drive, and free maintenance.
the information
Wind turbines use rare earth permanent magnet materials
Using high-quality bearings made wind turbines have strong magnet and other components radiation heat and low demagnetization rate
The body is made of high-quality steel pipes or ductile iron. It have a good anticorrosion treatment , prevent wind sanding, salt spraying and other rosining .The suitable temperature below zero 40 to 60 degree
Lower wind speed can generate electricity including wind speed of 2m/s which is a professional magnetic circuit design
The part of rotary body use a closed transmission slip ring, so the cable won't get tangled up
Because of less ground demand and low geology requirement, you can install it in the hills, the beach, river bank, desert terrain etc.
generator sets stable operation and has reliable quality that the design life of 20 years for an investment long-term benefits
Wind turbine blades are made of compound glass fiber informed plastic
Technical paramenter
`model
500w
The diameter of wind wheel
1.6m
The rotate speed (r/min)
180
Rate wind speed
10m/s
Start up wind speed (m/s)
2.5
Working up wind speed(m/s)
3-25
security wind speed (m/s)
50
Rated power
500w
The max power
650W
Voltage(DC)
24v
The height of tower(m)
8m
Guy cable tower type(mm)
114*6
Output control system
Charger Control inverter
Battery reference
12v100ap 2pcs
vertical axis 500w wind turbine with high wind speed(VAWT)
1.vertical axis wind turbine
2.Low start-up wind speed
3.Easy to install &operate
4.No maintenance required
5.CE
vertical axis 500w wind turbine with h
igh wind speed
(VAWT)
About us
We are Qingdao hongkun wind power equipment CO;LTD
We are the specializing manufacturer of vertical axis wind turbine, horizontal axis wind turbine and wind and solar panels.
We will give you the best price
Our motor is the PMG ,which has no gears, directly drive, and free maintenance.
The information
Wind turbines use rare earth permanent magnet materials
Useing high-quality bearings made wind turbines have strong magnet and other components radiation heat and low demagnetization rate
The body is made of high-quality steel pipes or ductile iron. It have a good anticorrosion treatment , prevent wind sanding, salt spraying and other erosioning .The suitable temperature below zero 40 to 60 degree
Lower wind speed can generate electricity including wind speed of 2m/s which is a professional magnetic circuit design
The part of rotary body use a closed transmission slip ring, so the cable won't get tangled up
Because of less ground demand and low geology requirement, you can install it in the hills, the beach, river bank, desert terrain etc.
generator sets stable operation and has reliable quality that the design life of 20 years for an investment long-term benefits
Wind turbine blades are made of compound glass fiber inforced plastic
Technical paramenter
`model
500w
The diameter of wind wheel
1.6m
The rotate speed (r/min)
180
Rate wind speed
10m/s
Start up wind speed (m/s)
2.5
Working up wind speed(m/s)
3-25
security wind speed (m/s)
50
Rated power
500w
The max power
650W
Voltage(DC)
24v
The height of tower(m)
8m
Guy cable tower type(mm)
114*6
Output control system
Charger Control inverter
Battery reference
12v100ap 2pcs
2.Low start-up wind speed
3.Easy to install &operate
4.No maintenance required
5.CE
vertical axis 500w wind turbine with h
igh wind speed
(VAWT)
About us
We are Qingdao hongkun wind power equipment CO;LTD
We are the specializing manufacturer of vertical axis wind turbine, horizontal axis wind turbine and wind and solar panels.
We will give you the best price
Our motor is the PMG ,which has no gears, directly drive, and free maintenance.
The information
Wind turbines use rare earth permanent magnet materials
Useing high-quality bearings made wind turbines have strong magnet and other components radiation heat and low demagnetization rate
The body is made of high-quality steel pipes or ductile iron. It have a good anticorrosion treatment , prevent wind sanding, salt spraying and other erosioning .The suitable temperature below zero 40 to 60 degree
Lower wind speed can generate electricity including wind speed of 2m/s which is a professional magnetic circuit design
The part of rotary body use a closed transmission slip ring, so the cable won't get tangled up
Because of less ground demand and low geology requirement, you can install it in the hills, the beach, river bank, desert terrain etc.
generator sets stable operation and has reliable quality that the design life of 20 years for an investment long-term benefits
Wind turbine blades are made of compound glass fiber inforced plastic
Technical paramenter
`model
500w
The diameter of wind wheel
1.6m
The rotate speed (r/min)
180
Rate wind speed
10m/s
Start up wind speed (m/s)
2.5
Working up wind speed(m/s)
3-25
security wind speed (m/s)
50
Rated power
500w
The max power
650W
Voltage(DC)
24v
The height of tower(m)
8m
Guy cable tower type(mm)
114*6
Output control system
Charger Control inverter
Battery reference
12v100ap 2pcs
Subscribe to:
Posts (Atom)